AM3356: How to keep the sdio clock always alive for wifi modules ?

We used the chip am3356, and we connected a wifi module through the sdio interface. In the process of speed measurement, we found that the rates of 11a and 11n were very poor. The manufacturer of the wifi module required our SDIO clock to keep in regular supply, so that the wifi module could be used normally. We measured the CLK of SDIO through the oscilloscope, which is not in the usual state as shown in the figure below. We tried to modify the following registers of am3356, but found that the clock of sdio was still the same as before after setting. We need to find a way to keep sdio's clock always running.

SNBC SNBC：

18/5000In addition, the kernel versions we use are as follows

Linux 2010150827 4.19.94-gbe5389fd85 #48 PREEMPT Fri Jun 7 16:12:43 CST 2024 armv7l GNU/Linux

,

Eirwen：

Hi

感谢您对TI产品的关注！为更加有效地解决您的问题，建议你在美国E2E上发帖 e2e.ti.com/，将由资深的英文论坛工程师为您提供帮助。