AWR2944: uniflash烧写失败

我们使用GD25Q64EWIGR型号的flash芯片，使用uniflash烧录是出现下面问题

volume_downVerboseClearClose
[2024/8/8 下午6:19:08] [INFO] Cortex_R5_0: Initialization complete.
[2024/8/8 下午6:19:08] [INFO] Cortex_R5_0: Sending UART Uniflash image at location C:\ti\uniflash_8.6.0\deskdb\content\TICloudAgent\win\ccs_base\mmWave\gen2/images/sbl_uart_uniflash.release.tiimage
[2024/8/8 下午6:19:26] [ERROR] Cortex_R5_0: XMODEM send failed, no response OR incorrect response from EVM OR cancelled by user, power cycle EVM and run this script again !!!
[2024/8/8 下午6:19:26] [INFO] Cortex_R5_0: UART Uniflash image sent.
[2024/8/8 下午6:19:26] [INFO] Cortex_R5_0: Sending SBL image at location E:/Fangjiajia/TDM/sbl_qspi.release.tiimage
[2024/8/8 下午6:19:36] [ERROR] Cortex_R5_0: XMODEM send failed, no response OR incorrect response from EVM OR cancelled by user, power cycle EVM and run this script again !!!
[2024/8/8 下午6:19:36] [ERROR] Cortex_R5_0: XMODEM recv failed, no response OR incorrect response from EVM OR cancelled by user,Power cycle EVM and run this script again !!!
[2024/8/8 下午6:19:36] [INFO] Cortex_R5_0: SBL image sent
[2024/8/8 下午6:19:36] [INFO] Cortex_R5_0: Sending Appimage at location E:/Fangjiajia/TDM/awr2944_corner_radar_921600_points.appimage
[2024/8/8 下午6:19:36] [ERROR] Cortex_R5_0: XMODEM send failed, no response OR incorrect response from EVM OR cancelled by user, power cycle EVM and run this script again !!!
[2024/8/8 下午6:19:36] [ERROR] Cortex_R5_0: XMODEM recv failed, no response OR incorrect response from EVM OR cancelled by user,Power cycle EVM and run this script again !!!
[2024/8/8 下午6:19:36] [INFO] Cortex_R5_0: Appimage sent
[2024/8/8 下午6:19:36] [INFO] Cortex_R5_0: Instance deinitialized!

多次换芯片问题还在，麻烦帮忙确认一下问题所在

Alice：

您好，

      请参考下面帖子的解决方法是否有帮助

      AWR2944: UNIFLASH GD25Q64C flash verify failed! – Sensors forum – Sensors – TI E2E support forums