TAS6424E-Q1: Diagnostic Function

Hi expert, 

According to the current needs of customers for diagnosis,
For two faults, short-circuit to ground and short-circuit to power supply, the diagnosis period is 2s, and the fault needs to be diagnosed 5 times and then reported to DTC.
Correspondingly, the detection cycle of the chip should be set to read every 400ms to diagnose the fault.

According to our understanding, when the current of 6424 is abnormal, the chip will automatically shut down the corresponding channel and set it to a high-impedance state, and the corresponding status bit should be cleared, and the diagnosis should be reactivated, so that the chip can re-detect the state.

Would you like to confirm that reading diagnostic information (reading) and activating diagnostic (writing) every 400ms will affect the normal operation of the chip?
(e.g. affecting the timing of mute to produce pop sounds, etc.)

Thanks a lot! 

Andy

Links：

Unfortunately, we also don't have the guidance for you.

To solve your issue, we recommend that you post your question on the English E2E support forums（https://e2e.ti.com/p/addpost）, which will be assisted by experienced experts.

TRANSLATE with x

English

Arabic
Hebrew
Polish

Bulgarian
Hindi
Portuguese

Catalan
Hmong Daw
Romanian

Chinese Simplified
Hungarian
Russian

Chinese Traditional
Indonesian
Slovak

Czech
Italian
Slovenian

Danish
Japanese
Spanish

Dutch
Klingon
Swedish

English
Korean
Thai

Estonian
Latvian
Turkish

Finnish
Lithuanian
Ukrainian

French
Malay
Urdu

German
Maltese
Vietnamese

Greek
Norwegian
Welsh

Haitian Creole
Persian

TRANSLATE with

COPY THE URL BELOW

Back

EMBED THE SNIPPET BELOW IN YOUR SITE

Enable collaborative features and customize widget: Bing Webmaster Portal
Back