TI中文支持网DSP芯片内部的程序可以运行，但是不能通过仿真器连接，也不能通过SCI下载程序。以下为错误提示代码。
—–[An error has occurred and this utility has aborted]——————–
This error is generated by TI's USCIF driver or utilities.
The value is '-233' (0xffffff17).
The title is 'SC_ERR_PATH_BROKEN'.
The explanation is:
The JTAG IR and DR scan-paths cannot circulate bits, they may be broken.
An attempt to scan the JTAG scan-path has failed.
The target's JTAG scan-path appears to be broken
with a stuck-at-ones or stuck-at-zero fault.
[End: Texas Instruments XDS2xx USB Debug Probe]
Seven Han：您先看下wiki给出的常见仿真器连接问题解决方法：processors.wiki.ti.com/…/Debugging_JTAG_Connectivity_Problems
DSP芯片内部的程序可以运行，但是不能通过仿真器连接，也不能通过SCI下载程序。以下为错误提示代码。
—–[An error has occurred and this utility has aborted]——————–
This error is generated by TI's USCIF driver or utilities.
The value is '-233' (0xffffff17).
The title is 'SC_ERR_PATH_BROKEN'.
The explanation is:
The JTAG IR and DR scan-paths cannot circulate bits, they may be broken.
An attempt to scan the JTAG scan-path has failed.
The target's JTAG scan-path appears to be broken
with a stuck-at-ones or stuck-at-zero fault.
[End: Texas Instruments XDS2xx USB Debug Probe]
shaofeng kang：靠近仿真器需要上拉电阻。
