TDA4VM: the console is frozen as below

我在TDA4VM EVM开发板上调试，串口信息卡在如下log的位置，帮忙看看是怎么回事啊？

PSDK版本是08-06-010-03，设备树是 k3-j721e-common-proc-board.dts，我们没有改动，我怀疑是设备树配置不对。

I used the TDA4VM EVM board，the console is frozen as below，what‘s the matter？

the PSDK is 08-06-010-03 and device-tree is  k3-j721e-common-proc-board.dts， I havn't change it，may be the dts need be modified？

NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb3-dirty
NOTICE: BL31: Built : 11:24:40, May 30 2023
ERROR: GTC_CNTFID0 is 0! Assuming 200000000 Hz. Fix Bootloader
I/TC:
I/TC: OP-TEE version: 3.20.0 (gcc version 9.2.1 20191025 (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10))) #1 Tue May 30 11:24:46 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check optee.readthedocs.io/…/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.3–v08.06.03 (Chill Capybar')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080]
[ 0.000000] Linux version 5.10.162-g76b3e88d56 (oe-user@oe-host) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #1 SMP PREEMPT Tue May 30 11:26:02 UTC 2023
[ 0.000000] Machine model: Texas Instruments K3 J721E SoC
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a4000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a4100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a5000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a5100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a6000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node c66-memory@a6100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a7000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node c66-memory@a7100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a8000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node c71-memory@a8100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ac000000, size 2 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-virtual-eth-queues@ac000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ac200000, size 30 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-virtual-eth-buffers@ac200000, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff]
[ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a8ffffff]
[ 0.000000] node 0: [mem 0x00000000a9000000-0x00000000a9ffffff]
[ 0.000000] node 0: [mem 0x00000000aa000000-0x00000000abbfffff]
[ 0.000000] node 0: [mem 0x00000000abc00000-0x00000000abffffff]
[ 0.000000] node 0: [mem 0x00000000ac000000-0x00000000adffffff]
[ 0.000000] node 0: [mem 0x00000000ae000000-0x00000000ffffffff]
[ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff]
[ 0.000000] cma: Reserved 512 MiB at 0x00000000e0000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 22 pages/cpu s50392 r8192 d31528 u90112
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: EL2 vector hardening
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192
[ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x00000000dc000000-0x00000000e0000000] (64MB)
[ 0.000000] Memory: 3271292K/4194304K available (11200K kernel code, 1160K rwdata, 4300K rodata, 1856K init, 433K bss, 398724K reserved, 524288K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 960 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000
[ 0.000000] ITS [mem 0x01820000-0x0182ffff]
[ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
[ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880800000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000880030000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880040000
[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[ 0.000002] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[ 0.008396] Console: colour dummy device 80×25
[ 0.012963] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.023633] pid_max: default: 32768 minimum: 301
[ 0.028390] LSM: Security Framework initializing
[ 0.033146] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.040724] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.049583] rcu: Hierarchical SRCU implementation.
[ 0.054660] Platform MSI: msi-controller@1820000 domain created
[ 0.060911] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created
[ 0.070215] EFI services will not be available.
[ 0.074938] smp: Bringing up secondary CPUs …
ERROR: GTC_CNTFID0 is 0! Assuming 200000000 Hz. Fix Bootloader
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
[ 0.093927] Detected PIPT I-cache on CPU1
[ 0.093951] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000
[ 0.093963] GICv3: CPU1: using allocated LPI pending table @0x0000000880050000
[ 0.093995] CPU1: Booted secondary processor 0x0000000001 [0x411fd080]
[ 0.094045] smp: Brought up 1 node, 2 CPUs
[ 0.123390] SMP: Total of 2 processors activated.
[ 0.128195] CPU features: detected: 32-bit EL0 Support
[ 0.133450] CPU features: detected: CRC32 instructions
[ 0.147668] CPU: All CPU(s) started at EL2
[ 0.151862] alternatives: patching kernel code
[ 0.156960] devtmpfs: initialized
[ 0.165948] KASLR disabled due to lack of seed
[ 0.170599] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.180563] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.194030] pinctrl core: initialized pinctrl subsystem
[ 0.199692] DMI not present or invalid.
[ 0.203943] NET: Registered protocol family 16
[ 0.209179] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.216500] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.224568] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.232880] thermal_sys: Registered thermal governor 'step_wise'
[ 0.232882] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.239480] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.253116] ASID allocator initialised with 32768 entries
[ 0.277761] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.284617] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.291463] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.298308] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.305777] cryptd: max_cpu_qlen set to 1000
[ 0.311922] k3-chipinfo 43000014.chipid: Family:J721E rev:SR1.0 JTAGID[0x0bb6402f] Detected
[ 0.320751] vsys_3v3: supplied by evm_12v0
[ 0.325117] vsys_5v0: supplied by evm_12v0
[ 0.329885] iommu: Default domain type: Translated
[ 0.335063] SCSI subsystem initialized
[ 0.339232] mc: Linux media interface: v0.10
[ 0.343608] videodev: Linux video capture interface: v2.00
[ 0.349244] pps_core: LinuxPPS API ver. 1 registered
[ 0.354315] pps_core: Software ver. 5.3.6 – Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.363652] PTP clock support registered
[ 0.367674] EDAC MC: Ver: 3.0.0
[ 0.371486] FPGA manager framework
[ 0.374994] Advanced Linux Sound Architecture Driver Initialized.
[ 0.381585] clocksource: Switched to clocksource arch_sys_counter
[ 0.387911] VFS: Disk quotas dquot_6.6.0
[ 0.391942] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.401550] NET: Registered protocol family 2
[ 0.406301] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.414896] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.423655] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.431857] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.439674] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.446481] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.453377] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.460775] NET: Registered protocol family 1
[ 0.465501] RPC: Registered named UNIX socket transport module.
[ 0.471564] RPC: Registered udp transport module.
[ 0.476368] RPC: Registered tcp transport module.
[ 0.481171] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.487753] NET: Registered protocol family 44
[ 0.492299] PCI: CLS 0 bytes, default 64
[ 0.496678] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.507124] Initialise system trusted keyrings
[ 0.511751] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.519904] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.526173] NFS: Registering the id_resolver key type
[ 0.531361] Key type id_resolver registered
[ 0.535631] Key type id_legacy registered
[ 0.539752] nfs4filelayout_init: NFSv4 File Layout Driver Registering…
[ 0.546601] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering…
[ 0.554240] 9p: Installing v9fs 9p2000 file system support
[ 0.579312] Key type asymmetric registered
[ 0.583499] Asymmetric key parser 'x509' registered
[ 0.588497] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.596056] io scheduler mq-deadline registered
[ 0.600681] io scheduler kyber registered
[ 0.606459] pinctrl-single 4301c000.pinctrl: 94 pins, size 376
[ 0.612651] pinctrl-single 11c000.pinctrl: 173 pins, size 692
[ 0.621802] ti-pat 31010000.pat: Found PAT Rev 1.0 with 16384 pages
[ 0.628226] debugfs: Directory '31010000.pat' with parent 'regmap' already present!
[ 0.636218] ti-pat 31011000.pat: Found PAT Rev 1.0 with 16384 pages
[ 0.642641] debugfs: Directory '31011000.pat' with parent 'regmap' already present!
[ 0.650587] ti-pat 31012000.pat: Found PAT Rev 1.0 with 16384 pages
[ 0.657005] debugfs: Directory '31012000.pat' with parent 'regmap' already present!
[ 0.664935] ti-pat 31013000.pat: Found PAT Rev 1.0 with 2048 pages
[ 0.671260] debugfs: Directory '31013000.pat' with parent 'regmap' already present!
[ 0.679212] ti-pat 31014000.pat: Found PAT Rev 1.0 with 2048 pages
[ 0.685538] debugfs: Directory '31014000.pat' with parent 'regmap' already present!
[ 0.695297] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled
[ 0.703616] arm-smmu-v3 36600000.iommu: ias 48-bit, oas 48-bit (features 0x00001faf)
[ 0.711911] arm-smmu-v3 36600000.iommu: allocated 65536 entries for cmdq
[ 0.719003] arm-smmu-v3 36600000.iommu: allocated 32768 entries for evtq
[ 0.727585] arm-smmu-v3 36600000.iommu: msi_domain absent – falling back to wired irqs
[ 0.740890] brd: module loaded
[ 0.747482] loop: module loaded
[ 0.751233] megasas: 07.714.04.00-rc1
[ 0.757069] tun: Universal TUN/TAP device driver, 1.6
[ 0.762548] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 0.768957] igbvf: Copyright (c) 2009 – 2012 Intel Corporation.
[ 0.775031] sky2: driver version 1.30
[ 0.779406] VFIO – User Level meta-driver version: 0.3
[ 0.785202] i2c /dev entries driver
[ 0.789730] sdhci: Secure Digital Host Controller Interface driver
[ 0.796050] sdhci: Copyright(c) Pierre Ossman
[ 0.800716] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.807141] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.813500] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ….
[ 0.820914] optee: probing for conduit method.
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[ 0.825477] optee: revision 3.20 (8e74d476)
[ 0.841884] optee: dynamic shared memory is enabled
[ 0.851344] optee: initialized driver
[ 0.856576] NET: Registered protocol family 17
[ 0.861201] 9pnet: Installing 9P2000 support
[ 0.865604] Key type dns_resolver registered
[ 0.870056] Loading compiled-in X.509 certificates
[ 0.883922] ti-sci 44083000.dmsc: ABI: 3.1 (firmware rev 0x0008 '8.6.3–v08.06.03 (Chill Capybar')
[ 0.937996] davinci-mcasp 2ba0000.mcasp: IRQ common not found
[ 0.945701] omap_i2c 40b00000.i2c: bus 0 rev0.12 at 100 kHz
[ 0.951776] omap_i2c 40b10000.i2c: bus 1 rev0.12 at 100 kHz
[ 0.958195] omap_i2c 42120000.i2c: bus 2 rev0.12 at 100 kHz
[ 0.964653] pca953x 3-0020: supply vcc not found, using dummy regulator
[ 0.971474] pca953x 3-0020: using no AI
[ 0.998472] pca953x 3-0022: supply vcc not found, using dummy regulator
[ 1.005279] pca953x 3-0022: using AI
[ 1.009556] gpio-480 (CTRL_PM_I2C_OE): hogged as output/high
[ 1.015534] gpio-481 (MCASP/TRACE_MUX_S0): hogged as output/low
[ 1.021775] gpio-482 (MCASP/TRACE_MUX_S1): hogged as output/high
[ 1.028270] omap_i2c 2000000.i2c: bus 3 rev0.12 at 400 kHz
[ 1.034748] omap_i2c 2010000.i2c: bus 4 rev0.12 at 400 kHz
[ 1.044654] omap_i2c 2020000.i2c: bus 5 rev0.12 at 400 kHz
[ 1.050993] pca953x 6-0020: supply vcc not found, using dummy regulator
[ 1.057826] pca953x 6-0020: using no AI
[ 1.086272] omap_i2c 2030000.i2c: bus 6 rev0.12 at 400 kHz
[ 1.092378] omap_i2c 2040000.i2c: bus 7 rev0.12 at 100 kHz
[ 1.098341] omap_i2c 2050000.i2c: bus 8 rev0.12 at 100 kHz
[ 1.104594] pca953x 9-0020: supply vcc not found, using dummy regulator
[ 1.111414] pca953x 9-0020: using no AI
[ 1.137917] omap_i2c 2060000.i2c: bus 9 rev0.12 at 400 kHz
[ 1.144395] ti-sci-intr bus@100000:bus@28380000:interrupt-controller2: Interrupt Router 137 domain created
[ 1.154365] ti-sci-intr bus@100000:interrupt-controller0: Interrupt Router 131 domain created
[ 1.163156] ti-sci-intr bus@100000:main-navss:interrupt-controller1: Interrupt Router 213 domain created
[ 1.172987] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator domain 209 created
[ 1.194282] j721e-pcie 2900000.pcie: host bridge /bus@100000/pcie@2900000 ranges:
[ 1.201956] j721e-pcie 2900000.pcie: IO 0x0010001000..0x0010010fff -> 0x0010001000
[ 1.210233] j721e-pcie 2900000.pcie: MEM 0x0010011000..0x0017ffffff -> 0x0010011000
[ 1.218509] j721e-pcie 2900000.pcie: IB MEM 0x0000000000..0xffffffffffff -> 0x0000000000
[ 2.234140] j721e-pcie 2900000.pcie: PCI host bridge to bus 0000:00
[ 2.240555] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.246161] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x10001000-0x10010fff])
[ 2.255852] pci_bus 0000:00: root bus resource [mem 0x10011000-0x17ffffff]
[ 2.262906] pci 0000:00:00.0: [104c:b00d] type 00 class 0x060400
[ 2.269045] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 2.278915] pci 0000:00:00.0: ignoring class 0x060400 (doesn't match header type 00)
[ 2.286890] pci 0000:00:00.0: supports D1
[ 2.290984] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 2.296871] pci 0000:00:00.0: reg 0x224: [mem 0x00000000-0x003fffff 64bit]
[ 2.303899] pci 0000:00:00.0: VF(n) BAR0 space: [mem 0x00000000-0x00ffffff 64bit] (contains BAR0 for 4 VFs)
[ 2.313896] pci 0000:00:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x2 link at 0000:00:00.0 (capable of 31.506 Gb/s with 16.0 GT/s PCIe x2 link)
[ 2.331697] j721e-pcie 2910000.pcie: host bridge /bus@100000/pcie@2910000 ranges:
[ 2.339371] j721e-pcie 2910000.pcie: IO 0x0018001000..0x0018010fff -> 0x0018001000
[ 2.347651] j721e-pcie 2910000.pcie: MEM 0x0018011000..0x001fffffff -> 0x0018011000
[ 2.355927] j721e-pcie 2910000.pcie: IB MEM 0x0000000000..0xffffffffffff -> 0x0000000000
[ 2.464912] cdns-sierra-phy 5010000.serdes: Timeout waiting for PHY status ready
[ 2.472476] phy phy-5010000.serdes.11: phy poweron failed –> -110
[ 2.478792] j721e-pcie 2910000.pcie: Failed to init phy
[ 2.484161] j721e-pcie: probe of 2910000.pcie failed with error -110
[ 2.490993] j721e-pcie 2920000.pcie: host bridge /bus@100000/pcie@2920000 ranges:
[ 2.498660] j721e-pcie 2920000.pcie: IO 0x4400001000..0x4400010fff -> 0x0000001000
[ 2.506937] j721e-pcie 2920000.pcie: MEM 0x4400011000..0x4407ffffff -> 0x0000011000
[ 2.515213] j721e-pcie 2920000.pcie: IB MEM 0x0000000000..0xffffffffffff -> 0x0000000000

cao qi：

After I removed the interrupts-related attribute in pcie node of the k3-j721e-main.dtsi, I can boot the board into the shell.I think this change is equivalent to not running the PCIe driver. Can you configure the correct PCIe node for me? PCIe is required on the board.

我在 k3-j721e-main.dtsi 中删除pcie里面的interrupts相关属性后，可以启动到shell了。

从代码看，这相当于没有运行pcie驱动。可以把正确的pcie节点配置给我吗？板子上需要用到PCIe。

I delete  interrupts of the pcie node in the k3-j721e-main.dtsi： // interrupt-names = "link_state"; //FENGWEI // interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>; //FENGWEI // device_type = "pci"; //FENGWEI

,

Shine：

请问有没有运行vision apps里的"make linux_fs_install_sd" ？可以把firmware复制到sd card里。

,

cao qi：

这一步做过的。

可以把正确的pcie节点配置给我吗？

,

Shine：

已经转给e2e产品线工程师，请关注下面帖子的回复。https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1271613/tda4vm-question-about-k3-j721e-common-proc-board-dts