TI中文支持网Part Number: CC2538DK
为了使用边界路由器，开启TSCH,我在目录(contiki-ng-develop/examples/rpl-border-router)的Makefile文件中添加代码：MAKE_MAC = MAKE_MAC_TSCH
但是烧录进板子后，边界路由器不能正常运行了，串口打印如下：
contiki-ng-develop/examples/rpl-border-router-1$ sudo make TARGET=cc2538dk connect-router sudo ../../tools/serial-io/tunslip6 fd00::1/64 ********SLIP started on /dev/ttyUSB0'' opened tun device /dev/tun0'' ifconfig tun0 inet hostname mtu 1500 up ifconfig tun0 add fd00::1/64 ifconfig tun0 add fe80::0:0:0:1/64 ifconfig tun0 tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 127.0.1.1 netmask 255.255.255.255 destination 127.0.1.1 inet6 fe80::b4b9:8473:81c5:2802 prefixlen 64 scopeid 0x20 inet6 fd00::1 prefixlen 64 scopeid 0x0 inet6 fe80::1 prefixlen 64 scopeid 0x20 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 500 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
我怀疑是cc2538运行不了这个程序，有前辈可以帮忙提个建议吗? 如何将边界路由器正常运行tsch.
zheng li：
板子损坏，更换解决
