TI中文支持网Part Number:TDA4VM
你好
我们使用的平台是tda4ve j721s2 平台，我们在8.4版本的sdk上面已经验证好了摄像头，现在切换到了8.5版本的sdk，运行摄像头的时候出现了下面的错误,请帮忙看一下
App Create Graph Done! 832.018575 s: VX_ZONE_ERROR:[ownContextSendCmd:802] Command ack message returned failure cmd_status: -1
832.018627 s: VX_ZONE_ERROR:[ownContextSendCmd:838] tivxEventWait() failed.
832.018635 s: VX_ZONE_ERROR:[ownNodeKernelInit:525] Target kernel, TIVX_CMD_NODE_CREATE failed for node capture_node
832.018642 s: VX_ZONE_ERROR:[ownNodeKernelInit:526] Please be sure the target callbacks have been registered for this core
832.018648 s: VX_ZONE_ERROR:[ownNodeKernelInit:527] If the target callbacks have been registered, please ensure no errors are occurring within the create callback of this kernel
832.019155 s: VX_ZONE_ERROR:[ownGraphNodeKernelInit:583] kernel init for node 0, kernel com.ti.capture … failed !!!
832.019169 s: VX_ZONE_ERROR:[vxVerifyGraph:2055] Node kernel init failed
832.019175 s: VX_ZONE_ERROR:[vxVerifyGraph:2109] Graph verify failed
[MCU2_0] 832.017828 s: [UDMA][MCU2_0] 832.017867 s: [Error] RM PSI Pairing failed!!!
[MCU2_0] 832.017893 s: [UDMA][MCU2_0] 832.017919 s: [Error] UDMA channel paring failed!!
[MCU2_0] 832.017964 s: src/csirx_drvUdma.c @ Line 246:[MCU2_0] 832.017990 s: [ERROR]UDMA channel open FAILED!!!
[MCU2_0] 832.018024 s: src/csirx_drv.c @ Line 1544:[MCU2_0] 832.018049 s: [ERROR]UDMA channel close FAILED!!!
[MCU2_0] 832.018080 s: src/csirx_drv.c @ Line 1544:[MCU2_0] 832.018104 s: [ERROR]UDMA channel close FAILED!!!
[MCU2_0] 832.018133 s: src/csirx_drv.c @ Line 1544:[MCU2_0] 832.018156 s: [ERROR]UDMA channel close FAILED!!!
[MCU2_0] 832.018186 s: src/csirx_drv.c @ Line 1544:[MCU2_0] 832.018209 s: [ERROR]UDMA channel close FAILED!!!
[MCU2_0] 832.018238 s: src/csirx_drv.c @ Line 402:[MCU2_0] 832.018262 s: Create failed for given configuration
[MCU2_0] 832.018294 s: src/fvid2_drvMgr.c @ Line 759:[MCU2_0] 832.018317 s: Driver create failed!!
[MCU2_0] 832.018352 s: VX_ZONE_ERROR:[tivxCaptureCreate:1206] : Capture Create Failed!!!
期待回复
Shine：
已把您的问题升级到英文e2e论坛，请关注下面帖子的回复。https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1195106/tda4ve-q1-camer-capture-create-failed-when-upgrading-from-8-4-to-8-5
,
Shine：
请看下面e2e工程师的回复。
Is the UDMA initialization successful here?
Could you please share the logs of "source ./vision_apps_init.sh" too along with the full application logs?
,
bad person：
[MCU2_0] 4.458046 s: ### CPU Frequency = 1000000000 Hz[MCU2_0] 4.458079 s: CPU is running FreeRTOS[MCU2_0] 4.458101 s: APP: Init … !!![MCU2_0] 4.458121 s: SCICLIENT: Init … !!![MCU2_0] 4.458262 s: SCICLIENT: DMSC FW version [8.5.2–v08.05.02 (Chill Capybar][MCU2_0] 4.458296 s: SCICLIENT: DMSC FW revision 0x8 [MCU2_0] 4.458326 s: SCICLIENT: DMSC FW ABI revision 3.1[MCU2_0] 4.458359 s: SCICLIENT: Init … Done !!![MCU2_0] 4.458382 s: UDMA: Init … !!![MCU2_0] 4.459233 s: UDMA: Init … Done !!![MCU2_0] 4.459271 s: UDMA: Init … !!![MCU2_0] 4.459748 s: UDMA: Init for CSITX/CSIRX … Done !!![MCU2_0] 4.459784 s: MEM: Init … !!![MCU2_0] 4.459818 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ d9000000 of size 16777216 bytes !!![MCU2_0] 4.459878 s: MEM: Init … Done !!![MCU2_0] 4.459901 s: IPC: Init … !!![MCU2_0] 4.459945 s: IPC: 5 CPUs participating in IPC !!![MCU2_0] 4.459979 s: IPC: Waiting for HLOS to be ready … !!![MCU2_0] 13.014681 s: IPC: HLOS is ready !!![MCU2_0] 13.023996 s: IPC: Init … Done !!![MCU2_0] 13.024035 s: APP: Syncing with 4 CPUs … !!![MCU2_0] 13.323845 s: APP: Syncing with 4 CPUs … Done !!![MCU2_0] 13.323877 s: REMOTE_SERVICE: Init … !!![MCU2_0] 13.325348 s: REMOTE_SERVICE: Init … Done !!![MCU2_0] 13.325385 s: FVID2: Init … !!![MCU2_0] 13.325442 s: FVID2: Init … Done !!![MCU2_0] 13.325465 s: SCICLIENT: Sciclient_pmSetModuleState module=214 state=2[MCU2_0] 13.325700 s: SCICLIENT: Sciclient_pmSetModuleState success[MCU2_0] 13.325741 s: VHWA: VPAC Init … !!![MCU2_0] 13.325764 s: SCICLIENT: Sciclient_pmSetModuleState module=361 state=2[MCU2_0] 13.325896 s: SCICLIENT: Sciclient_pmSetModuleState success[MCU2_0] 13.325928 s: VHWA: LDC Init … !!![MCU2_0] 13.328787 s: VHWA: LDC Init … Done !!![MCU2_0] 13.328820 s: VHWA: MSC Init … !!![MCU2_0] 13.338033 s: VHWA: MSC Init … Done !!![MCU2_0] 13.338073 s: VHWA: NF Init … !!![MCU2_0] 13.339037 s: VHWA: NF Init … Done !!![MCU2_0] 13.339069 s: VHWA: VISS Init … !!![MCU2_0] 13.346240 s: VHWA: VISS Init … Done !!![MCU2_0] 13.346279 s: VHWA: VPAC Init … Done !!![MCU2_0] 13.346317 s: VX_ZONE_INIT:Enabled[MCU2_0] 13.346343 s: VX_ZONE_ERROR:Enabled[MCU2_0] 13.346365 s: VX_ZONE_WARNING:Enabled[MCU2_0] 13.347224 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target MCU2-0 [MCU2_0] 13.347402 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target VPAC_NF [MCU2_0] 13.347583 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target VPAC_LDC1 [MCU2_0] 13.347756 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target VPAC_MSC1 [MCU2_0] 13.347928 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target VPAC_MSC2 [MCU2_0] 13.348154 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target VPAC_VISS1 [MCU2_0] 13.348380 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CAPTURE1 [MCU2_0] 13.348596 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CAPTURE2 [MCU2_0] 13.348809 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target DISPLAY1 [MCU2_0] 13.349026 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target DISPLAY2 [MCU2_0] 13.349225 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CSITX [MCU2_0] 13.349421 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CAPTURE3 [MCU2_0] 13.349615 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CAPTURE4 [MCU2_0] 13.349822 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CAPTURE5 [MCU2_0] 13.350027 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CAPTURE6 [MCU2_0] 13.350240 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CAPTURE7 [MCU2_0] 13.350451 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CAPTURE8 [MCU2_0] 13.350651 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target DSS_M2M1 [MCU2_0] 13.350860 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target DSS_M2M2 [MCU2_0] 13.351065 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target DSS_M2M3 [MCU2_0] 13.351262 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target DSS_M2M4 [MCU2_0] 13.351448 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CSITX2 [MCU2_0] 13.351491 s: VX_ZONE_INIT:[tivxInitLocal:145] Initialization Done !!![MCU2_0] 13.351521 s: APP: OpenVX Target kernel init … !!![MCU2_0] 13.381955 s: APP: OpenVX Target kernel init … Done !!![MCU2_0] 13.381988 s: CSI2RX: Init … !!![MCU2_0] 13.382010 s: SCICLIENT: Sciclient_pmSetModuleState module=136 state=2[MCU2_0] 13.382104 s: SCICLIENT: Sciclient_pmSetModuleState success[MCU2_0] 13.382132 s: SCICLIENT: Sciclient_pmSetModuleState module=38 state=2[MCU2_0] 13.382204 s: SCICLIENT: Sciclient_pmSetModuleState success[MCU2_0] 13.382230 s: SCICLIENT: Sciclient_pmSetModuleState module=39 state=2[MCU2_0] 13.382291 s: SCICLIENT: Sciclient_pmSetModuleState success[MCU2_0] 13.382318 s: SCICLIENT: Sciclient_pmSetModuleState module=152 state=2[MCU2_0] 13.382378 s: SCICLIENT: Sciclient_pmSetModuleState success[MCU2_0] 13.382404 s: SCICLIENT: Sciclient_pmSetModuleState module=153 state=2[MCU2_0] 13.382467 s: SCICLIENT: Sciclient_pmSetModuleState success[MCU2_0] 13.382612 s: CSI2RX: Init … Done !!![MCU2_0] 13.382637 s: CSI2TX: Init … !!![MCU2_0] 13.382657 s: SCICLIENT: Sciclient_pmSetModuleState module=136 state=2[MCU2_0] 13.382719 s: SCICLIENT: Sciclient_pmSetModuleState success[MCU2_0] 13.382749 s: SCICLIENT: Sciclient_pmSetModuleState module=40 state=2[MCU2_0] 13.382854 s: SCICLIENT: Sciclient_pmSetModuleState success[MCU2_0] 13.382879 s: SCICLIENT: Sciclient_pmSetModuleState module=41 state=2[MCU2_0] 13.382973 s: SCICLIENT: Sciclient_pmSetModuleState success[MCU2_0] 13.382999 s: SCICLIENT: Sciclient_pmSetModuleState module=363 state=2[MCU2_0] 13.383064 s: SCICLIENT: Sciclient_pmSetModuleState success[MCU2_0] 13.383126 s: CSI2TX: Init … Done !!![MCU2_0] 13.383150 s: ISS: Init … !!![MCU2_0] 13.383177 s: IssSensor_Init … Done !!![MCU2_0] 13.383225 s: IttRemoteServer_Init … Done !!![MCU2_0] 13.383251 s: VISS REMOTE SERVICE: Init … !!![MCU2_0] 13.383300 s: VISS REMOTE SERVICE: Init … Done !!![MCU2_0] 13.383325 s: UDMA Copy: Init … !!![MCU2_0] 13.384300 s: UDMA Copy: Init … Done !!![MCU2_0] 13.384367 s: APP: Init … Done !!![MCU2_0] 13.384392 s: APP: Run … !!![MCU2_0] 13.384412 s: IPC: Starting echo test …[MCU2_0] 13.386474 s: APP: Run … Done !!![MCU2_0] 13.386564 s: fsync gpio 4 [MCU2_0] 13.387314 s: IPC: Echo status: mpu1_0[x] mcu2_0[s] mcu2_1[.] C7X_1[P] C7X_2[.] [MCU2_0] 13.387392 s: IPC: Echo status: mpu1_0[x] mcu2_0[s] mcu2_1[.] C7X_1[P] C7X_2[P] [MCU2_0] 13.387461 s: IPC: Echo status: mpu1_0[x] mcu2_0[s] mcu2_1[P] C7X_1[P] C7X_2[P] [MCU2_1] 4.374827 s: CIO: Init … Done !!![MCU2_1] 4.374874 s: ### CPU Frequency = 1000000000 Hz[MCU2_1] 4.374905 s: CPU is running FreeRTOS[MCU2_1] 4.374925 s: APP: Init … !!![MCU2_1] 4.374944 s: SCICLIENT: Init … !!![MCU2_1] 4.375081 s: SCICLIENT: DMSC FW version [8.5.2–v08.05.02 (Chill Capybar][MCU2_1] 4.375116 s: SCICLIENT: DMSC FW revision 0x8 [MCU2_1] 4.375143 s: SCICLIENT: DMSC FW ABI revision 3.1[MCU2_1] 4.375173 s: SCICLIENT: Init … Done !!![MCU2_1] 4.375195 s: UDMA: Init … !!![MCU2_1] 4.376192 s: UDMA: Init … Done !!![MCU2_1] 4.376225 s: MEM: Init … !!![MCU2_1] 4.376255 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ da000000 of size 16777216 bytes !!![MCU2_1] 4.376313 s: MEM: Init … Done !!![MCU2_1] 4.376333 s: IPC: Init … !!![MCU2_1] 4.376380 s: IPC: 5 CPUs participating in IPC !!![MCU2_1] 4.376415 s: IPC: Waiting for HLOS to be ready … !!![MCU2_1] 13.314554 s: IPC: HLOS is ready !!![MCU2_1] 13.323775 s: IPC: Init … Done !!![MCU2_1] 13.323812 s: APP: Syncing with 4 CPUs … !!![MCU2_1] 13.323844 s: APP: Syncing with 4 CPUs … Done !!![MCU2_1] 13.323872 s: REMOTE_SERVICE: Init … !!![MCU2_1] 13.325211 s: REMOTE_SERVICE: Init … Done !!![MCU2_1] 13.325247 s: FVID2: Init … !!![MCU2_1] 13.325299 s: FVID2: Init … Done !!![MCU2_1] 13.325322 s: VHWA: DMPAC: Init … !!![MCU2_1] 13.325344 s: SCICLIENT: Sciclient_pmSetModuleState module=58 state=2[MCU2_1] 13.325555 s: SCICLIENT: Sciclient_pmSetModuleState success[MCU2_1] 13.325584 s: SCICLIENT: Sciclient_pmSetModuleState module=62 state=2[MCU2_1] 13.325740 s: SCICLIENT: Sciclient_pmSetModuleState success[MCU2_1] 13.325767 s: VHWA: DOF Init … !!![MCU2_1] 13.330327 s: VHWA: DOF Init … Done !!![MCU2_1] 13.330364 s: VHWA: SDE Init … !!![MCU2_1] 13.331768 s: VHWA: SDE Init … Done !!![MCU2_1] 13.331800 s: VHWA: DMPAC: Init … Done !!![MCU2_1] 13.331835 s: VX_ZONE_INIT:Enabled[MCU2_1] 13.331859 s: VX_ZONE_ERROR:Enabled[MCU2_1] 13.331881 s: VX_ZONE_WARNING:Enabled[MCU2_1] 13.332748 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target MCU2-1 [MCU2_1] 13.332938 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target DMPAC_SDE [MCU2_1] 13.333111 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target DMPAC_DOF [MCU2_1] 13.333154 s: VX_ZONE_INIT:[tivxInitLocal:145] Initialization Done !!![MCU2_1] 13.333183 s: APP: OpenVX Target kernel init … !!![MCU2_1] 13.333408 s: APP: OpenVX Target kernel init … Done !!![MCU2_1] 13.333437 s: UDMA Copy: Init … !!![MCU2_1] 13.334826 s: UDMA Copy: Init … Done !!![MCU2_1] 13.334864 s: APP: Init … Done !!![MCU2_1] 13.334887 s: APP: Run … !!![MCU2_1] 13.334907 s: IPC: Starting echo test …[MCU2_1] 13.336976 s: APP: Run … Done !!![MCU2_1] 13.337542 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[s] C7X_1[P] C7X_2[.] [MCU2_1] 13.337614 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[s] C7X_1[P] C7X_2[P] [MCU2_1] 13.387220 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] mcu2_1[s] C7X_1[P] C7X_2[P] [C7x_1 ] 4.652907 s: CIO: Init … Done !!![C7x_1 ] 4.652922 s: ### CPU Frequency = 1000000000 Hz[C7x_1 ] 4.652934 s: CPU is running FreeRTOS[C7x_1 ] 4.652942 s: APP: Init … !!![C7x_1 ] 4.652950 s: SCICLIENT: Init … !!![C7x_1 ] 4.653073 s: SCICLIENT: DMSC FW version [8.5.2–v08.05.02 (Chill Capybar][C7x_1 ] 4.653088 s: SCICLIENT: DMSC FW revision 0x8 [C7x_1 ] 4.653098 s: SCICLIENT: DMSC FW ABI revision 3.1[C7x_1 ] 4.653109 s: SCICLIENT: Init … Done !!![C7x_1 ] 4.653118 s: UDMA: Init … !!![C7x_1 ] 4.653987 s: UDMA: Init … Done !!![C7x_1 ] 4.654000 s: MEM: Init … !!![C7x_1 ] 4.654012 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ 117000000 of size 268435456 bytes !!![C7x_1 ] 4.654035 s: MEM: Created heap (L3_MEM, id=1, flags=0x00000001) @ 70020000 of size 3964928 bytes !!![C7x_1 ] 4.654053 s: MEM: Created heap (L2_MEM, id=2, flags=0x00000001) @ 64800000 of size 458752 bytes !!![C7x_1 ] 4.654071 s: MEM: Created heap (L1_MEM, id=3, flags=0x00000001) @ 64e00000 of size 16384 bytes !!![C7x_1 ] 4.654088 s: MEM: Created heap (DDR_SCRATCH_MEM, id=4, flags=0x00000001) @ 100000000 of size 385875968 bytes !!![C7x_1 ] 4.654107 s: MEM: Init … Done !!![C7x_1 ] 4.654115 s: IPC: Init … !!![C7x_1 ] 4.654130 s: IPC: 5 CPUs participating in IPC !!![C7x_1 ] 4.654145 s: IPC: Waiting for HLOS to be ready … !!![C7x_1 ] 11.948648 s: IPC: HLOS is ready !!![C7x_1 ] 11.950514 s: IPC: Init … Done !!![C7x_1 ] 11.950529 s: APP: Syncing with 4 CPUs … !!![C7x_1 ] 13.323846 s: APP: Syncing with 4 CPUs … Done !!![C7x_1 ] 13.323864 s: REMOTE_SERVICE: Init … !!![C7x_1 ] 13.324020 s: REMOTE_SERVICE: Init … Done !!![C7x_1 ] 13.324067 s: VX_ZONE_INIT:Enabled[C7x_1 ] 13.324080 s: VX_ZONE_ERROR:Enabled[C7x_1 ] 13.324090 s: VX_ZONE_WARNING:Enabled[C7x_1 ] 13.324291 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:59] Added target DSP_C7-1 [C7x_1 ] 13.324355 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:59] Added target DSP_C7-1_PRI_2 [C7x_1 ] 13.324415 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:59] Added target DSP_C7-1_PRI_3 [C7x_1 ] 13.324477 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:59] Added target DSP_C7-1_PRI_4 [C7x_1 ] 13.324542 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:59] Added target DSP_C7-1_PRI_5 [C7x_1 ] 13.324605 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:59] Added target DSP_C7-1_PRI_6 [C7x_1 ] 13.324667 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:59] Added target DSP_C7-1_PRI_7 [C7x_1 ] 13.324730 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:59] Added target DSP_C7-1_PRI_8 [C7x_1 ] 13.324754 s: VX_ZONE_INIT:[tivxInitLocal:145] Initialization Done !!![C7x_1 ] 13.324767 s: APP: OpenVX Target kernel init … !!![C7x_1 ] 13.324907 s: APP: OpenVX Target kernel init … Done !!![C7x_1 ] 13.324922 s: APP: Init … Done !!![C7x_1 ] 13.324932 s: APP: Run … !!![C7x_1 ] 13.324941 s: IPC: Starting echo test …[C7x_1 ] 13.325056 s: APP: Run … Done !!![C7x_1 ] 13.326041 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] C7X_1[s] C7X_2[P] [C7x_1 ] 13.337437 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] C7X_1[s] C7X_2[P] [C7x_1 ] 13.387176 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] mcu2_1[P] C7X_1[s] C7X_2[P] [C7x_2 ] 4.746424 s: CIO: Init … Done !!![C7x_2 ] 4.746440 s: ### CPU Frequency = 1000000000 Hz[C7x_2 ] 4.746452 s: CPU is running FreeRTOS[C7x_2 ] 4.746461 s: APP: Init … !!![C7x_2 ] 4.746470 s: SCICLIENT: Init … !!![C7x_2 ] 4.746590 s: SCICLIENT: DMSC FW version [8.5.2–v08.05.02 (Chill Capybar][C7x_2 ] 4.746604 s: SCICLIENT: DMSC FW revision 0x8 [C7x_2 ] 4.746615 s: SCICLIENT: DMSC FW ABI revision 3.1[C7x_2 ] 4.746626 s: SCICLIENT: Init … Done !!![C7x_2 ] 4.746635 s: UDMA: Init … !!![C7x_2 ] 4.747474 s: UDMA: Init … Done !!![C7x_2 ] 4.747487 s: MEM: Init … !!![C7x_2 ] 4.747499 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ 127000000 of size 16777216 bytes !!![C7x_2 ] 4.747522 s: MEM: Created heap (L2_MEM, id=2, flags=0x00000001) @ 65800000 of size 458752 bytes !!![C7x_2 ] 4.747541 s: MEM: Created heap (L1_MEM, id=3, flags=0x00000001) @ 65e00000 of size 16384 bytes !!![C7x_2 ] 4.747559 s: MEM: Created heap (DDR_SCRATCH_MEM, id=4, flags=0x00000001) @ 128000000 of size 67108864 bytes !!![C7x_2 ] 4.747579 s: MEM: Init … Done !!![C7x_2 ] 4.747589 s: IPC: Init … !!![C7x_2 ] 4.747604 s: IPC: 5 CPUs participating in IPC !!![C7x_2 ] 4.747621 s: IPC: Waiting for HLOS to be ready … !!![C7x_2 ] 12.333895 s: IPC: HLOS is ready !!![C7x_2 ] 12.335676 s: IPC: Init … Done !!![C7x_2 ] 12.335692 s: APP: Syncing with 4 CPUs … !!![C7x_2 ] 13.323847 s: APP: Syncing with 4 CPUs … Done !!![C7x_2 ] 13.323865 s: REMOTE_SERVICE: Init … !!![C7x_2 ] 13.324016 s: REMOTE_SERVICE: Init … Done !!![C7x_2 ] 13.324040 s: VX_ZONE_INIT:Enabled[C7x_2 ] 13.324074 s: VX_ZONE_ERROR:Enabled[C7x_2 ] 13.324087 s: VX_ZONE_WARNING:Enabled[C7x_2 ] 13.324542 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:59] Added target DSP-1 [C7x_2 ] 13.324566 s: VX_ZONE_INIT:[tivxInitLocal:145] Initialization Done !!![C7x_2 ] 13.324579 s: APP: OpenVX Target kernel init … !!![C7x_2 ] 13.324835 s: APP: OpenVX Target kernel init … Done !!![C7x_2 ] 13.324852 s: UDMA Copy: Init … !!![C7x_2 ] 13.325649 s: UDMA Copy: Init … Done !!![C7x_2 ] 13.325663 s: APP: Init … Done !!![C7x_2 ] 13.325673 s: APP: Run … !!![C7x_2 ] 13.325682 s: IPC: Starting echo test …[C7x_2 ] 13.325796 s: APP: Run … Done !!![C7x_2 ] 13.326051 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] C7X_1[P] C7X_2[s] [C7x_2 ] 13.337454 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] C7X_1[P] C7X_2[s] [C7x_2 ] 13.387192 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] mcu2_1[P] C7X_1[P] C7X_2[s]
,
Shine：
已把您的回复更新到e2e帖子，请关注帖子的回复。
,
bad person：
Hi Shine
我们已找到问题，谢谢
,
Shine：
不客气~
如果方便的话，分享一下解决办法，给其他客户参考，谢谢！
,
bad person：
8.5的sdk中会默认在linux的设备树中引用csirx节点，如果没有关闭的话会导致资源被占用，于是出现上面的问题
,
Shine：
非常感谢分享解决办法！
