TI中文支持网Part Number:TDA4VM
Hi experts:
I placed tiboot3.bin atf_optee.appimage tifs.bin u-boot.img u-boot-spl.appimage and app ( there are signed by core-secdev-k3) on sd card . System boot failed when power on,print log like this.
when atf_optee.appimage not signed,print log like this.
Calling Sciclient_procBootRequestProcessor, ProcId 0x20…
Loading BootImage
MMCBootImageLate: fp 0x 0xa088f0b8, fileName is 0:/atf_optee.appimage
Is app signed correctly??
App verification fails!! Boot Halted!!
So why atf_optee.appimage verify fail? Check the build log, build tools(core-sec-dev-k3) 、 pem files and signed flow is configured conrect 。
Could you please provided HS EVM board can used atf_optee.appimage and please sign HS atf_optee.appimage method with us.
Below is my signed command:
1):./x509CertificateGen.sh -b ~/atf_optee.appimage -o ~/atf_optee_sig.appimage.signed -c R5 -l 0x0 -k $(TISDK)/ti-processor-sdk-rtos-j721e-evm-07_02_00_06/pdk_jacinto_07_01_05_14/packages/ti/build/makerules/k3_dev_mpk.pem
-d DEBUG -j DBG_FULL_ENABLE -m SPLIT_MODE
or
2):x509CertificateGen.sh -b ~/atf_optee.appimage -o ~/atf_optee_sig.appimage.signed -c
R5 -l 0x0 -k $(TISDK)/ti-processor-sdk-rtos-j721e-evm-07_02_00_06/pdk_jacinto_07_01_05_14/packages/ti/build/makerules/k3_dev_mpk.pem
Best Regards!
weiwei
Below is my used atf_otpee.appimage file. You can change the txt to appimage try it at HS EVM board and you can get the same failure log like me. Thanks!
atf_optee.txt
Nancy Wang：
建议您去英文论坛咨询，会有产品线工程师给您提供支持，谢谢！
https://e2e.ti.com/support/processors-group/processors/f/processors-forum
