TI中文支持网Part Number:IWR1443
Hi
There is some question about the setting of IWR1443 With DC1000.
From this discussion we can know the difference about complex 1x and complex 2x mode. e2e.ti.com/…/2654999
Since I know to configue the ADC sampling mode as "real only" mode or "complex mode", which is set in "ADCBUFCFG" register. I have no idea to find some configuration about the complex 1x or 2x mode. Could you please give me some information about the related register for this configuration? Or could I configure this on the "mmWave Studio", which is a configue GUI Tools for mmWave Device.
If can not do this on this type of mmWave board, could you please inform me which type of mmWave device support this configuration, which is the switch between complex 1x and complex 2x.
Could you give me some help? Thanks.
Shine：
可以在mmwave stuido里选择。
,
Lieke Chen：
谢谢您，如果通过编程方便的切换采样模式，请问可以通过修改寄存器的方式实现吗？或者有一些对应的API来支持这个配置的吗？
,
Shine：
可以通过mmwave radar control API函数来设置。请看C:\ti\mmwave_dfp\mmwave_dfp_02_02_00_03\docs\mmWave-Radar-Interface-Control.pdf文档5.2.2 Sub block 0x0082 – AWR_ADCOUT_CONF_SET_SB
,
Lieke Chen：
已解决，谢谢
,
Shine：
不客气~
