TI中文支持网Part Number:AWR2243
根据mmwave studio cascade use guide手册配置GUI捕获方式，到SensorConfig标签栏配置时，点击TDAXX ARM，Output窗口提示Frame Periodicity Response from Capture Card timed out!!，导致我后面的数据捕获都不能进行，不知道怎么解决这个问题，还有一个手册上面有一个地方和我的不太一样。
手册上红框内的文件是这样的，我的是这样的
，我也没有找到手册上面的那个文件，不知道是不是这个原因导致我不能捕获数据
Shine：
请问有按照文档4. Setting Up TDA Capture Card配置TDA2XX吗？
,
hongyi qi：
手册第四节是安装SSD，使用usb线通过串口连接电脑，和更改电脑IP地址，使用网线连接电脑和TDA2XX,这些我都按照手册实现了，第四节最后是向SD卡中烧写TDA固件，也没有问题。只不过在手册第六节，格式化SSD时，执行fdisk命令最后一步时，提示fdisk: WARNING: rereading partition table failed, kernel still uses old table: Device or resource busy，其他格式化的步骤都正常，这表示格式化ssd失败吗？
,
Shine：
请问是否有参考过下面的帖子？https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/881829/tidep-01012-reformating-ssd—warning-rereading-partion-table-failed
,
hongyi qi：
参考了这个帖子，我的没什么问题，我自己按照手册使用LUA脚本配置开发板，运行“Cascade_Capture.lua”脚本时，输出窗口提示 系统找不到指定的文件。
[16:17:54] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:19:15] [RadarAPI]: Frame already stopped for the cascade device[16:19:29] [RadarAPI]: ar1.TDACaptureCard_StartRecord_mult(15, 0, 0, Cascade_Capture_22xx, 0)[16:19:29] Device 0 – Configuring TDA with Width : 2048 and Height : 768[16:19:29] [RadarAPI]: Device 0 – setWidthAndHeight Status: Passed[16:19:29] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:19:29] Device 1 – Configuring TDA with Width : 2048 and Height : 768[16:19:29] [RadarAPI]: Device 1 – setWidthAndHeight Status: Passed[16:19:29] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:19:29] Device 2 – Configuring TDA with Width : 2048 and Height : 768[16:19:29] [RadarAPI]: Device 2 – setWidthAndHeight Status: Passed[16:19:29] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:19:29] Device 3 – Configuring TDA with Width : 2048 and Height : 768[16:19:29] [RadarAPI]: Device 3 – setWidthAndHeight Status: Passed[16:19:29] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:19:29] Sending Frame Periodicity of 100 to TDA..[16:19:29] [RadarAPI]: Status: Passed. Frame Periodicity sent to TDA[16:19:29] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:19:29] Sending Capture Directory with name /mnt/ssd/Cascade_Capture_22xx to TDA..[16:19:29] [RadarAPI]: Status: Passed. Capture Directory sent to TDA[16:19:29] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:19:29] Sending File Allocation of 0 files to TDA..[16:19:29] [RadarAPI]: Status: Passed. File Allocation sent to TDA[16:19:29] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:19:30] Sending Enable Data Packaging (0 – 16-bit; 1 – 12-bit) with value of 0 to TDA..[16:19:30] [RadarAPI]: Status: Passed. Enable Data Packaging sent to TDA[16:19:30] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:19:30] Sending Number of frames to capture with value of 0 to TDA..[16:19:30] [RadarAPI]: Status: Passed. Number of frames to capture sent to TDA[16:19:30] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:19:30] [RadarAPI]: Status: Passed for notifying TDA about Creating Application[16:19:30] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:19:30] [RadarAPI]: Status: Passed for notifying TDA about Start Frame[16:19:30] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:19:32] [RadarAPI]: ar1.StartFrame_mult(15)[16:19:32] [RadarAPI]: Status: Passed[16:19:32] [DeviceId-0] Frame start async event received![16:19:32] [DeviceId-3] Frame start async event received![16:19:32] [DeviceId-2] Frame start async event received![16:19:32] [DeviceId-1] Frame start async event received![16:19:33] [DeviceId-0] Frame End async event received![16:20:35] [RadarAPI]: Error: Cannot open file "\\.\nul". 系统找不到指定的文件。
应该是找不到WinSCP应用，无法启动导致无法传输数据，但是我电脑明明是下载了Winscp的，不知道怎么解决。
,
Chris Meng：
你好，
建议你参考mmwave studio cascade use guide里MIMO的说明，用默认的LUA进行板子的配置和数据采集。
如果有问题，能否重新安装一下相关软件，或者更换一台电脑尝试一下。测试时，电脑上的防火墙，杀毒软件能否关闭。
