Part Number:MMWCAS-DSP-EVMOther Parts Discussed in Thread:AWR2243
按照User guide中的设置,已经连上了。连接画面如下图
但是在数据采集设置的画面,蓝圈中的内容跟user guide上不一致
先点击“TDAxx ARM”,然后点击Trigger frame,会报如下报文,显示还是not framing
[09:57:32] [RadarAPI]: ar1.TDACaptureCard_StartRecord_mult(1, 0, 0, Cascade_Capture_22xx, 0)
[09:57:32] Device 0 – Configuring TDA with Width : 0 and Height : 0
[09:57:32] [RadarAPI]: Device 0 – setWidthAndHeight Status: Passed
[09:57:32] Device 1 – Configuring TDA with Width : 0 and Height : 0
[09:57:32] [RadarAPI]: Device 1 – setWidthAndHeight Status: Passed
[09:57:32] Device 2 – Configuring TDA with Width : 0 and Height : 0
[09:57:32] [RadarAPI]: Device 2 – setWidthAndHeight Status: Passed
[09:57:32] Device 3 – Configuring TDA with Width : 0 and Height : 0
[09:57:32] [RadarAPI]: Device 3 – setWidthAndHeight Status: Passed
[09:57:32] Sending Frame Periodicity of 0 to TDA..
[09:57:32] [RadarAPI]: Status: Passed. Frame Periodicity sent to TDA
[09:57:35] Frame Periodicity Response from Capture Card timed out!!
[09:57:41] [RadarAPI]: ar1.StartFrame_mult(1)
[09:57:45] Status: Failed, Error Type: RESP TIMEOUT
我在论坛上搜了下相关的帖子,也重新多次设置依然不能解决该问题,还请TI的工程师帮忙看下,谢谢。
Han Deng:
user guide 里面说明了需要先对slave device点击trigger frame,最后再对master device点击trigger frame,可以试试看
,
Shine:
按照楼上Han Deng说的试一下。For Frame Configuration, select the “Hardware Trigger” for all the enabled slave devices and “Software Trigger” for Master device.[09:57:32] Sending Frame Periodicity of 0 to TDA..这里Frame Periodicity=0有问题
,
Ruijie Zhu:
按先对slave device点击trigger frame,在对master device点击trigger frame,试了好几次,还是不行,一直会提示Status: Failed, Error Type: RESP TIMEOUT,还请帮忙看下是什么原因?谢谢。
[13:42:47] Device 0 – Configuring TDA with Width : 0 and Height : 0[13:42:47] [RadarAPI]: Device 0 – setWidthAndHeight Status: Passed[13:42:47] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:42:47] Device 1 – Configuring TDA with Width : 0 and Height : 0[13:42:47] [RadarAPI]: Device 1 – setWidthAndHeight Status: Passed[13:42:47] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:42:47] Device 2 – Configuring TDA with Width : 0 and Height : 0[13:42:47] [RadarAPI]: Device 2 – setWidthAndHeight Status: Passed[13:42:47] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:42:47] Device 3 – Configuring TDA with Width : 0 and Height : 0[13:42:47] [RadarAPI]: Device 3 – setWidthAndHeight Status: Passed[13:42:47] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:42:47] Sending Frame Periodicity of 0 to TDA..[13:42:47] [RadarAPI]: Status: Passed. Frame Periodicity sent to TDA[13:42:47] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:42:47] Sending Capture Directory with name /mnt/ssd/adc_data to TDA..[13:42:47] [RadarAPI]: Status: Passed. Capture Directory sent to TDA[13:42:47] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:42:47] Sending File Allocation of 1 files to TDA..[13:42:47] [RadarAPI]: Status: Passed. File Allocation sent to TDA[13:42:47] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:42:47] Sending Enable Data Packaging (0 – 16-bit; 1 – 12-bit) with value of 0 to TDA..[13:42:47] [RadarAPI]: Status: Passed. Enable Data Packaging sent to TDA[13:42:47] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:42:47] Sending Number of frames to capture with value of 1 to TDA..[13:42:47] [RadarAPI]: Status: Passed. Number of frames to capture sent to TDA[13:42:47] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:42:48] [RadarAPI]: Status: Passed for notifying TDA about Creating Application[13:42:57] Create Application Response from Capture Card timed out!![13:43:00] [RadarAPI]: ar1.StartFrame_mult(2)[13:43:04] Status: Failed, Error Type: RESP TIMEOUT[13:43:25] [RadarAPI]: ar1.StartFrame_mult(4)[13:43:29] Status: Failed, Error Type: RESP TIMEOUT[13:43:34] [RadarAPI]: ar1.StartFrame_mult(8)[13:43:38] Status: Failed, Error Type: RESP TIMEOUT[13:43:41] [RadarAPI]: ar1.StartFrame_mult(1)[13:43:45] Status: Failed, Error Type: RESP TIMEOUT
,
Shine:
请看一下load BSS firmware的时候,是否使用的是C:\ti\mmwave_dfp\mmwave_dfp_02_02_00_03\firmware\xwr22xx_metaImage.bin,MSS firmware 不用load。从上面的截图,您load的是Mmwave studio里的Firmware,这个是针对boost开发板的。
,
Ruijie Zhu:
我加载的就是C:\ti\mmwave_dfp\mmwave_dfp_02_02_00_03\firmware\xwr22xx_metaImage.bin,又重新加载了下,还是同样的报错,如下是截图和打印的数据,还请帮忙再看下,谢谢。
GM: ConstructorGM: Thu Dec 16 16:12:52 2021RSTD.Transmit("/Settings")[16:12:53] [16:12:53] ### Running Startup script: "C:\ti\mmwave_studio_03_00_00_14\mmWaveStudio\Scripts\Startup.lua" ###[16:12:53] RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")[16:12:53] RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")[16:12:53] Scripter ignored: Attempt to UnBuild() again or before Build.[16:12:53] RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\ti\\mmwave_studio_03_00_00_14\\mmWaveStudio\\Clients\\\\LabClient.dll")[16:12:53] RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")[16:12:53] RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")[16:12:53] RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")[16:12:53] RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")[16:12:53] RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")[16:12:53] RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\ti\\mmwave_studio_03_00_00_14\\mmWaveStudio\\RunTime\\SAL.dll")[16:12:53] RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")[16:12:53] RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")[16:12:53] RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")[16:12:53] RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")[16:12:53] RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")[16:12:53] RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")[16:12:53] RSTD.Transmit("/")[16:12:53] RSTD.SaveSettings(): Settings saved to "C:\Users\zhuruijie\AppData\Roaming\RSTD\config.xml"[16:12:53] RSTD.Build()[16:12:53] RSTD.SaveSettings(): Settings saved to "C:\Users\zhuruijie\AppData\Roaming\RSTD\config.xml"[16:12:53] RSTD.Transmit("/")[16:12:53] RSTD.AL_Build()[16:12:53] RSTD.AL_LoadXml()[16:12:53] RSTD.Transmit("/")[16:12:53] RSTD.AL_Init()[16:12:53] RSTD.Clients_Build()[16:12:53] GM: Init[16:12:53] GM: Loaded 'C:\ti\mmwave_studio_03_00_00_14\mmWaveStudio\Clients\\LabClient.dll'[16:12:53] GM: 1 Guest (s) init[16:12:53] GM: 1 Module(s) init[16:12:53] GM: 2 Tab (s) init[16:12:53] RSTD.Client_LoadXml()[16:12:53] [RadarAPI]: ar1.selectRadarMode(0)[16:12:53] [RadarAPI]: Status: Passed[16:12:53] Matlab Runtime Engine is installed[16:12:53] [RadarAPI]: Starting Matlab Engine..[16:12:57] [RadarAPI]: Matlab Engine Started![16:12:58] [RadarAPI]: ar1.selectCascadeMode(0)[16:12:58] [RadarAPI]: Status: Passed[16:12:58] [RadarAPI]: ar1.LoadSettings('C:\Users\zhuruijie\AppData\Roaming\RSTD\ar1gui.ini')[16:12:58] TESTING = false[16:12:58] RstdNet: Port 2777: Listening..[16:12:58] [16:12:58] ***Script completed successfully.***[16:13:04] [RadarAPI]: ar1.selectRadarMode(1)[16:13:04] [RadarAPI]: ar1.selectCascadeMode(1)[16:13:04] [RadarAPI]: Status: Passed[16:13:04] [RadarAPI]: Status: Passed[16:13:05] [RadarAPI]: ar1.SelectCaptureDevice("TDA2XX")[16:13:05] [RadarAPI]: Status: Passed[16:13:06] [RadarAPI]: TDAStatusCallback Event Registered[16:13:06] [RadarAPI]: registerTDAStatusCallback Status: Passed[16:13:06] [RadarAPI]: ar1.ConnectTDA("192.168.33.180", 5001, 15)[16:13:07] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:13:07] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:13:07] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_VERSION_INFO Async event recieved() with status 0. TDA Version : REL_VISION_SDK_03_07_01_00 Aug 5 2019 15:04:45[16:13:07] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:13:08] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:13:08] [RadarAPI]: ConnectTDACaptureCard Status: Passed[16:13:08] TDA Capture Card Status : CONNECTED![16:13:11] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:13:12] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:13:12] [RadarAPI]: ar1.FullReset(1)[16:13:12] [RadarAPI]: Status: Passed[16:13:12] [RadarAPI]: ar1.SOPControl_mult(1,4)[16:13:12] [RadarAPI]: Status: Passed[16:13:13] [RadarAPI]: ar1.PowerOn_mult(1, 0, 1000, 0,0)[16:13:13] [DeviceId-0] MSS power up done async event received![16:13:13] [RadarAPI]: Status: Passed[16:13:16] [RadarAPI]: ar1.DownloadBSSFw_mult(1,"C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin")[16:13:16] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(1, C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin)[16:13:22] [RadarAPI]: ar1.SelectChipVersion("AR1243")[16:13:22] [RadarAPI]: Status: Passed[16:13:22] [RadarAPI]: ar1.SelectChipVersion("AR1243")[16:13:22] [RadarAPI]: Status: Passed[16:13:22] [RadarAPI]: ar1.deviceVariantSelection("XWR2243")[16:13:22] [RadarAPI]: Status: Passed[16:13:22] [RadarAPI]: ar1.frequencyBandSelection("77G")[16:13:22] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[16:13:22] [RadarAPI]: Status: Passed[16:13:22] Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[16:13:22] [RadarAPI]: ar1.RfEnable_mult(1)[16:13:22] [DeviceId-0] BSS power up done async event received![16:13:22] [RadarAPI]: Status: Passed[16:13:26] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:13:26] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:13:27] [RadarAPI]: ar1.FullReset(2)[16:13:27] [RadarAPI]: Status: Passed[16:13:27] [RadarAPI]: ar1.SOPControl_mult(2,4)[16:13:27] [RadarAPI]: Status: Passed[16:13:28] [DeviceId-1] MSS power up done async event received![16:13:28] [RadarAPI]: ar1.AddDevice(2)[16:13:28] [RadarAPI]: Status: Passed[16:13:31] [RadarAPI]: ar1.DownloadBSSFw_mult(2,"C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin")[16:13:31] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(2, C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin)[16:13:37] [RadarAPI]: ar1.SelectChipVersion("AR1243")[16:13:37] [RadarAPI]: Status: Passed[16:13:37] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[16:13:37] [RadarAPI]: Status: Passed[16:13:37] Slave1 Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[16:13:37] [RadarAPI]: ar1.RfEnable_mult(2)[16:13:37] [DeviceId-1] BSS power up done async event received![16:13:37] [RadarAPI]: Status: Passed[16:13:41] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:13:42] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:13:42] [RadarAPI]: ar1.FullReset(4)[16:13:42] [RadarAPI]: Status: Passed[16:13:42] [RadarAPI]: ar1.SOPControl_mult(4,4)[16:13:42] [RadarAPI]: Status: Passed[16:13:44] [DeviceId-2] MSS power up done async event received![16:13:44] [RadarAPI]: ar1.AddDevice(4)[16:13:44] [RadarAPI]: Status: Passed[16:13:50] [RadarAPI]: ar1.DownloadBSSFw_mult(4,"C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin")[16:13:50] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(4, C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin)[16:13:55] [RadarAPI]: ar1.SelectChipVersion("AR1243")[16:13:55] [RadarAPI]: Status: Passed[16:13:55] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[16:13:55] [RadarAPI]: Status: Passed[16:13:56] Slave2 Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[16:13:56] [RadarAPI]: ar1.RfEnable_mult(4)[16:13:56] [DeviceId-2] BSS power up done async event received![16:13:56] [RadarAPI]: Status: Passed[16:14:01] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:14:01] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:14:02] [RadarAPI]: ar1.FullReset(8)[16:14:02] [RadarAPI]: Status: Passed[16:14:02] [RadarAPI]: ar1.SOPControl_mult(8,4)[16:14:02] [RadarAPI]: Status: Passed[16:14:04] [DeviceId-3] MSS power up done async event received![16:14:04] [RadarAPI]: ar1.AddDevice(8)[16:14:04] [RadarAPI]: Status: Passed[16:14:07] [RadarAPI]: ar1.DownloadBSSFw_mult(8,"C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin")[16:14:07] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(8, C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin)[16:14:12] [RadarAPI]: ar1.SelectChipVersion("AR1243")[16:14:12] [RadarAPI]: Status: Passed[16:14:12] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[16:14:12] [RadarAPI]: Status: Passed[16:14:12] Slave3 Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[16:14:12] [RadarAPI]: ar1.RfEnable_mult(8)[16:14:13] [DeviceId-3] BSS power up done async event received![16:14:13] [RadarAPI]: Status: Passed[16:15:27] [RadarAPI]: ar1.TDACaptureCard_StartRecord_mult(2, 0, 0, adc_data, 0)[16:15:27] Device 0 – Configuring TDA with Width : 0 and Height : 0[16:15:27] [RadarAPI]: Device 0 – setWidthAndHeight Status: Passed[16:15:27] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:15:27] Device 1 – Configuring TDA with Width : 0 and Height : 0[16:15:27] [RadarAPI]: Device 1 – setWidthAndHeight Status: Passed[16:15:27] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:15:27] Device 2 – Configuring TDA with Width : 0 and Height : 0[16:15:27] [RadarAPI]: Device 2 – setWidthAndHeight Status: Passed[16:15:27] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:15:27] Device 3 – Configuring TDA with Width : 0 and Height : 0[16:15:27] [RadarAPI]: Device 3 – setWidthAndHeight Status: Passed[16:15:27] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:15:27] Sending Frame Periodicity of 0 to TDA..[16:15:27] [RadarAPI]: Status: Passed. Frame Periodicity sent to TDA[16:15:27] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:15:27] Sending Capture Directory with name /mnt/ssd/adc_data to TDA..[16:15:27] [RadarAPI]: Status: Passed. Capture Directory sent to TDA[16:15:27] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:15:27] Sending File Allocation of 0 files to TDA..[16:15:27] [RadarAPI]: Status: Passed. File Allocation sent to TDA[16:15:27] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:15:27] Sending Enable Data Packaging (0 – 16-bit; 1 – 12-bit) with value of 0 to TDA..[16:15:27] [RadarAPI]: Status: Passed. Enable Data Packaging sent to TDA[16:15:27] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:15:27] Sending Number of frames to capture with value of 0 to TDA..[16:15:27] [RadarAPI]: Status: Passed. Number of frames to capture sent to TDA[16:15:27] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [16:15:27] [RadarAPI]: Status: Passed for notifying TDA about Creating Application[16:15:35] [RadarAPI]: ar1.StartFrame_mult(2)[16:15:37] Create Application Response from Capture Card timed out!![16:15:39] Status: Failed, Error Type: RESP TIMEOUT[16:15:49] [RadarAPI]: ar1.StartFrame_mult(4)[16:15:53] Status: Failed, Error Type: RESP TIMEOUT[16:15:57] [RadarAPI]: ar1.StartFrame_mult(8)[16:16:01] Status: Failed, Error Type: RESP TIMEOUT[16:16:05] [RadarAPI]: ar1.StartFrame_mult(1)[16:16:09] Status: Failed, Error Type: RESP TIMEOUT
,
Shine:
请尝试下面帖子里的方法,直接使用Cascade_Configuration_MIMO.lua。https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/850802/awr1243-awr1243-cascade-evk-mmwcas-rf-evm-mmwcas-dsp-evm
,
Ruijie Zhu:
方式1、按user guide中我先连接SPI,然后配置MIMO
配置后会报TDA ARM Failed,而且四个设备的SPI也显示disconnected
GM: ConstructorGM: Fri Dec 17 14:05:08 2021RSTD.Transmit("/Settings")[14:05:08] [14:05:08] ### Running Startup script: "C:\ti\mmwave_studio_03_00_00_14\mmWaveStudio\Scripts\Startup.lua" ###[14:05:08] RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")[14:05:08] RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")[14:05:08] Scripter ignored: Attempt to UnBuild() again or before Build.[14:05:08] RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\ti\\mmwave_studio_03_00_00_14\\mmWaveStudio\\Clients\\\\LabClient.dll")[14:05:08] RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")[14:05:08] RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")[14:05:08] RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")[14:05:08] RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")[14:05:08] RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")[14:05:08] RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\ti\\mmwave_studio_03_00_00_14\\mmWaveStudio\\RunTime\\SAL.dll")[14:05:08] RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")[14:05:08] RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")[14:05:08] RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")[14:05:08] RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")[14:05:08] RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")[14:05:08] RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")[14:05:08] RSTD.Transmit("/")[14:05:08] RSTD.SaveSettings(): Settings saved to "C:\Users\zhuruijie\AppData\Roaming\RSTD\config.xml"[14:05:08] RSTD.Build()[14:05:08] RSTD.SaveSettings(): Settings saved to "C:\Users\zhuruijie\AppData\Roaming\RSTD\config.xml"[14:05:08] RSTD.Transmit("/")[14:05:08] RSTD.AL_Build()[14:05:08] RSTD.AL_LoadXml()[14:05:08] RSTD.Transmit("/")[14:05:08] RSTD.AL_Init()[14:05:08] RSTD.Clients_Build()[14:05:08] GM: Init[14:05:08] GM: Loaded 'C:\ti\mmwave_studio_03_00_00_14\mmWaveStudio\Clients\\LabClient.dll'[14:05:08] GM: 1 Guest (s) init[14:05:08] GM: 1 Module(s) init[14:05:08] GM: 2 Tab (s) init[14:05:08] RSTD.Client_LoadXml()[14:05:08] [RadarAPI]: ar1.selectRadarMode(0)[14:05:08] [RadarAPI]: Status: Passed[14:05:08] Matlab Runtime Engine is installed[14:05:08] [RadarAPI]: Starting Matlab Engine..[14:05:12] [RadarAPI]: Matlab Engine Started![14:05:13] [RadarAPI]: ar1.selectCascadeMode(0)[14:05:13] [RadarAPI]: Status: Passed[14:05:13] [RadarAPI]: ar1.LoadSettings('C:\Users\zhuruijie\AppData\Roaming\RSTD\ar1gui.ini')[14:05:14] TESTING = false[14:05:14] RstdNet: Port 2777: Listening..[14:05:14] [14:05:14] ***Script completed successfully.***[14:05:19] [RadarAPI]: ar1.selectRadarMode(1)[14:05:19] [RadarAPI]: ar1.selectCascadeMode(1)[14:05:19] [RadarAPI]: Status: Passed[14:05:19] [RadarAPI]: Status: Passed[14:05:20] [RadarAPI]: ar1.SelectCaptureDevice("TDA2XX")[14:05:20] [RadarAPI]: Status: Passed[14:05:21] [RadarAPI]: TDAStatusCallback Event Registered[14:05:21] [RadarAPI]: registerTDAStatusCallback Status: Passed[14:05:21] [RadarAPI]: ar1.ConnectTDA("192.168.33.180", 5001, 15)[14:05:21] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:05:21] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:05:21] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_VERSION_INFO Async event recieved() with status 0. TDA Version : REL_VISION_SDK_03_07_01_00 Aug 5 2019 15:04:45[14:05:21] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:05:23] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:05:23] [RadarAPI]: ConnectTDACaptureCard Status: Passed[14:05:23] TDA Capture Card Status : CONNECTED![14:05:29] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:05:30] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:05:30] [RadarAPI]: ar1.FullReset(1)[14:05:30] [RadarAPI]: Status: Passed[14:05:30] [RadarAPI]: ar1.SOPControl_mult(1,4)[14:05:30] [RadarAPI]: Status: Passed[14:05:32] [RadarAPI]: ar1.PowerOn_mult(1, 0, 1000, 0,0)[14:05:32] [DeviceId-0] MSS power up done async event received![14:05:32] [RadarAPI]: Status: Passed[14:05:34] [RadarAPI]: ar1.DownloadBSSFw_mult(1,"C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin")[14:05:34] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(1, C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin)[14:05:39] [RadarAPI]: ar1.SelectChipVersion("AR1243")[14:05:39] [RadarAPI]: Status: Passed[14:05:39] [RadarAPI]: ar1.SelectChipVersion("AR1243")[14:05:39] [RadarAPI]: Status: Passed[14:05:39] [RadarAPI]: ar1.deviceVariantSelection("XWR2243")[14:05:39] [RadarAPI]: Status: Passed[14:05:39] [RadarAPI]: ar1.frequencyBandSelection("77G")[14:05:39] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[14:05:39] [RadarAPI]: Status: Passed[14:05:40] Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[14:05:40] [RadarAPI]: ar1.RfEnable_mult(1)[14:05:40] [DeviceId-0] BSS power up done async event received![14:05:40] [RadarAPI]: Status: Passed[14:05:44] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:05:45] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:05:45] [RadarAPI]: ar1.FullReset(2)[14:05:45] [RadarAPI]: Status: Passed[14:05:45] [RadarAPI]: ar1.SOPControl_mult(2,4)[14:05:45] [RadarAPI]: Status: Passed[14:05:46] [DeviceId-1] MSS power up done async event received![14:05:46] [RadarAPI]: ar1.AddDevice(2)[14:05:46] [RadarAPI]: Status: Passed[14:05:52] [RadarAPI]: ar1.DownloadBSSFw_mult(2,"C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin")[14:05:52] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(2, C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin)[14:05:57] [RadarAPI]: ar1.SelectChipVersion("AR1243")[14:05:57] [RadarAPI]: Status: Passed[14:05:57] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[14:05:57] [RadarAPI]: Status: Passed[14:05:57] Slave1 Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[14:05:57] [RadarAPI]: ar1.RfEnable_mult(2)[14:05:57] [DeviceId-1] BSS power up done async event received![14:05:57] [RadarAPI]: Status: Passed[14:06:02] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:06:02] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:06:03] [RadarAPI]: ar1.FullReset(4)[14:06:03] [RadarAPI]: Status: Passed[14:06:03] [RadarAPI]: ar1.SOPControl_mult(4,4)[14:06:03] [RadarAPI]: Status: Passed[14:06:03] [DeviceId-2] MSS power up done async event received![14:06:03] [RadarAPI]: ar1.AddDevice(4)[14:06:03] [RadarAPI]: Status: Passed[14:06:08] [RadarAPI]: ar1.DownloadBSSFw_mult(4,"C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin")[14:06:08] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(4, C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin)[14:06:13] [RadarAPI]: ar1.SelectChipVersion("AR1243")[14:06:13] [RadarAPI]: Status: Passed[14:06:13] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[14:06:13] [RadarAPI]: Status: Passed[14:06:14] Slave2 Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[14:06:14] [RadarAPI]: ar1.RfEnable_mult(4)[14:06:14] [DeviceId-2] BSS power up done async event received![14:06:14] [RadarAPI]: Status: Passed[14:06:20] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:06:20] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:06:21] [RadarAPI]: ar1.FullReset(8)[14:06:21] [RadarAPI]: Status: Passed[14:06:21] [RadarAPI]: ar1.SOPControl_mult(8,4)[14:06:21] [RadarAPI]: Status: Passed[14:06:23] [DeviceId-3] MSS power up done async event received![14:06:23] [RadarAPI]: ar1.AddDevice(8)[14:06:23] [RadarAPI]: Status: Passed[14:06:24] [RadarAPI]: ar1.DownloadBSSFw_mult(8,"C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin")[14:06:24] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(8, C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin)[14:06:29] [RadarAPI]: ar1.SelectChipVersion("AR1243")[14:06:29] [RadarAPI]: Status: Passed[14:06:29] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[14:06:29] [RadarAPI]: Status: Passed[14:06:29] Slave3 Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[14:06:29] [RadarAPI]: ar1.RfEnable_mult(8)[14:06:30] [DeviceId-3] BSS power up done async event received![14:06:30] [RadarAPI]: Status: Passed[14:06:39] Setting up Studio for Cascade started..[14:06:39] [RadarAPI]: Connection to the TDA is already established![14:06:39] ConnectTDA Successful[14:06:39] selectCascadeMode Successful[14:06:39] Setting up Studio for Cascade ended..[14:06:39] [RadarAPI]: ar1.RemoveDevice(8)[14:06:39] [RadarAPI]: Status: Passed[14:06:39] [RadarAPI]: ar1.RemoveDevice(4)[14:06:39] [RadarAPI]: Status: Passed[14:06:39] [RadarAPI]: ar1.RemoveDevice(2)[14:06:39] [RadarAPI]: Status: Passed[14:06:39] [RadarAPI]: ar1.PowerOff_mult()[14:06:39] [RadarAPI]: Status: Passed[14:06:39] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:06:40] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:06:40] [RadarAPI]: ar1.FullReset(1)[14:06:40] [RadarAPI]: Status: Passed[14:06:40] [RadarAPI]: ar1.SOPControl_mult(1,4)[14:06:40] [RadarAPI]: Status: Passed[14:06:40] Master : SOP Reset Successful[14:06:40] [DeviceId-0] MSS power up done async event received![14:06:40] [RadarAPI]: ar1.PowerOn_mult(1, 0, 1000, 0,0)[14:06:40] [RadarAPI]: Status: Passed[14:06:40] Master : SPI Connection Successful[14:06:40] [RadarAPI]: Error: Could not find file 'C:\ti\mmwave_dfp_02_02_02_01\firmware\xwr22xx_metaImage.bin'[14:06:40] Master : FW Download Failed[14:06:40] [14:06:40] ***Script completed successfully.***[14:06:52] Loops Remaining : 1[14:06:52] Starting TDA ARM…[14:06:52] [RadarAPI]: ar1.TDACaptureCard_StartRecord_mult(1, 0, 0, Cascade_Capture_22xx, 0)[14:06:52] Device 0 – Configuring TDA with Width : 0 and Height : 0[14:06:52] [RadarAPI]: Device 0 – setWidthAndHeight Status: Passed[14:06:52] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:06:52] Device 1 – Configuring TDA with Width : 0 and Height : 0[14:06:52] [RadarAPI]: Device 1 – setWidthAndHeight Status: Passed[14:06:52] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:06:52] Device 2 – Configuring TDA with Width : 0 and Height : 0[14:06:52] [RadarAPI]: Device 2 – setWidthAndHeight Status: Passed[14:06:52] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:06:52] Device 3 – Configuring TDA with Width : 0 and Height : 0[14:06:52] [RadarAPI]: Device 3 – setWidthAndHeight Status: Passed[14:06:52] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:06:52] Sending Frame Periodicity of 0 to TDA..[14:06:52] [RadarAPI]: Status: Passed. Frame Periodicity sent to TDA[14:06:52] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:06:52] Sending Capture Directory with name /mnt/ssd/Cascade_Capture_22xx to TDA..[14:06:52] [RadarAPI]: Status: Passed. Capture Directory sent to TDA[14:06:52] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:06:52] Sending File Allocation of 0 files to TDA..[14:06:52] [RadarAPI]: Status: Passed. File Allocation sent to TDA[14:06:52] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:06:52] Sending Enable Data Packaging (0 – 16-bit; 1 – 12-bit) with value of 0 to TDA..[14:06:52] [RadarAPI]: Status: Passed. Enable Data Packaging sent to TDA[14:06:52] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:06:53] Sending Number of frames to capture with value of 0 to TDA..[14:06:53] [RadarAPI]: Status: Passed. Number of frames to capture sent to TDA[14:06:53] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:06:53] [RadarAPI]: Status: Passed for notifying TDA about Creating Application[14:07:03] Create Application Response from Capture Card timed out!![14:07:03] TDA ARM Failed[14:07:03] [14:07:03] ***Script completed successfully.***
方式2、我不连接SPI,直接按步骤配置MIMO脚本,依然会报TDA ARM Failed,然后再连接SPI,也连接不上
GM: ConstructorGM: Fri Dec 17 15:07:01 2021RSTD.Transmit("/Settings")[15:07:01] [15:07:01] ### Running Startup script: "C:\ti\mmwave_studio_03_00_00_14\mmWaveStudio\Scripts\Startup.lua" ###[15:07:01] RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")[15:07:01] RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")[15:07:01] Scripter ignored: Attempt to UnBuild() again or before Build.[15:07:01] RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\ti\\mmwave_studio_03_00_00_14\\mmWaveStudio\\Clients\\\\LabClient.dll")[15:07:01] RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")[15:07:01] RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")[15:07:01] RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")[15:07:01] RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")[15:07:01] RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")[15:07:01] RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\ti\\mmwave_studio_03_00_00_14\\mmWaveStudio\\RunTime\\SAL.dll")[15:07:01] RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")[15:07:01] RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")[15:07:01] RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")[15:07:01] RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")[15:07:01] RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")[15:07:01] RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")[15:07:01] RSTD.Transmit("/")[15:07:01] RSTD.SaveSettings(): Settings saved to "C:\Users\zhuruijie\AppData\Roaming\RSTD\config.xml"[15:07:01] RSTD.Build()[15:07:01] RSTD.SaveSettings(): Settings saved to "C:\Users\zhuruijie\AppData\Roaming\RSTD\config.xml"[15:07:01] RSTD.Transmit("/")[15:07:01] RSTD.AL_Build()[15:07:01] RSTD.AL_LoadXml()[15:07:02] RSTD.Transmit("/")[15:07:02] RSTD.AL_Init()[15:07:02] RSTD.Clients_Build()[15:07:02] GM: Init[15:07:02] GM: Loaded 'C:\ti\mmwave_studio_03_00_00_14\mmWaveStudio\Clients\\LabClient.dll'[15:07:02] GM: 1 Guest (s) init[15:07:02] GM: 1 Module(s) init[15:07:02] GM: 2 Tab (s) init[15:07:02] RSTD.Client_LoadXml()[15:07:02] [RadarAPI]: ar1.selectRadarMode(0)[15:07:02] [RadarAPI]: Status: Passed[15:07:02] Matlab Runtime Engine is installed[15:07:02] [RadarAPI]: Starting Matlab Engine..[15:07:06] [RadarAPI]: Matlab Engine Started![15:07:07] [RadarAPI]: ar1.selectCascadeMode(0)[15:07:07] [RadarAPI]: Status: Passed[15:07:07] [RadarAPI]: ar1.LoadSettings('C:\Users\zhuruijie\AppData\Roaming\RSTD\ar1gui.ini')[15:07:07] TESTING = false[15:07:07] RstdNet: Port 2777: Listening..[15:07:07] [15:07:07] ***Script completed successfully.***[15:07:12] [RadarAPI]: ar1.selectRadarMode(1)[15:07:12] [RadarAPI]: ar1.selectCascadeMode(1)[15:07:12] [RadarAPI]: Status: Passed[15:07:12] [RadarAPI]: Status: Passed[15:07:16] Setting up Studio for Cascade started..[15:07:16] [RadarAPI]: ar1.SelectCaptureDevice("TDA2XX")[15:07:16] [RadarAPI]: Status: Passed[15:07:16] [RadarAPI]: TDAStatusCallback Event Registered[15:07:16] [RadarAPI]: registerTDAStatusCallback Status: Passed[15:07:16] [RadarAPI]: ar1.ConnectTDA("192.168.33.180", 5001, 15)[15:07:17] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [15:07:17] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [15:07:17] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_VERSION_INFO Async event recieved() with status 0. TDA Version : REL_VISION_SDK_03_07_01_00 Aug 5 2019 15:04:45[15:07:17] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [15:07:19] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [15:07:19] [RadarAPI]: ConnectTDACaptureCard Status: Passed[15:07:19] TDA Capture Card Status : CONNECTED![15:07:19] ConnectTDA Successful[15:07:19] selectCascadeMode Successful[15:07:19] Setting up Studio for Cascade ended..[15:07:19] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [15:07:19] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [15:07:20] [RadarAPI]: ar1.FullReset(1)[15:07:20] [RadarAPI]: Status: Passed[15:07:20] [RadarAPI]: ar1.SOPControl_mult(1,4)[15:07:20] [RadarAPI]: Status: Passed[15:07:20] Master : SOP Reset Successful[15:07:20] [RadarAPI]: ar1.PowerOn_mult(1, 0, 1000, 0,0)[15:07:20] [DeviceId-0] MSS power up done async event received![15:07:20] [RadarAPI]: Status: Passed[15:07:20] Master : SPI Connection Successful[15:07:20] [RadarAPI]: Error: Could not find file 'C:\ti\mmwave_dfp_02_02_02_01\firmware\xwr22xx_metaImage.bin'[15:07:20] Master : FW Download Failed[15:07:20] [15:07:20] ***Script completed successfully.***[15:07:29] Loops Remaining : 1[15:07:29] Starting TDA ARM…[15:07:29] [RadarAPI]: ar1.TDACaptureCard_StartRecord_mult(1, 0, 0, Cascade_Capture_22xx, 0)[15:07:29] Device 0 – Configuring TDA with Width : 0 and Height : 0[15:07:29] [RadarAPI]: Device 0 – setWidthAndHeight Status: Passed[15:07:29] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [15:07:29] Device 1 – Configuring TDA with Width : 0 and Height : 0[15:07:29] [RadarAPI]: Device 1 – setWidthAndHeight Status: Passed[15:07:29] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [15:07:29] Device 2 – Configuring TDA with Width : 0 and Height : 0[15:07:29] [RadarAPI]: Device 2 – setWidthAndHeight Status: Passed[15:07:29] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [15:07:29] Device 3 – Configuring TDA with Width : 0 and Height : 0[15:07:29] [RadarAPI]: Device 3 – setWidthAndHeight Status: Passed[15:07:29] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [15:07:29] Sending Frame Periodicity of 0 to TDA..[15:07:29] [RadarAPI]: Status: Passed. Frame Periodicity sent to TDA[15:07:29] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [15:07:29] Sending Capture Directory with name /mnt/ssd/Cascade_Capture_22xx to TDA..[15:07:29] [RadarAPI]: Status: Passed. Capture Directory sent to TDA[15:07:29] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [15:07:29] Sending File Allocation of 0 files to TDA..[15:07:29] [RadarAPI]: Status: Passed. File Allocation sent to TDA[15:07:29] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [15:07:29] Sending Enable Data Packaging (0 – 16-bit; 1 – 12-bit) with value of 0 to TDA..[15:07:29] [RadarAPI]: Status: Passed. Enable Data Packaging sent to TDA[15:07:29] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [15:07:29] Sending Number of frames to capture with value of 0 to TDA..[15:07:29] [RadarAPI]: Status: Passed. Number of frames to capture sent to TDA[15:07:29] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [15:07:29] [RadarAPI]: Status: Passed for notifying TDA about Creating Application[15:07:39] Create Application Response from Capture Card timed out!![15:07:39] TDA ARM Failed[15:07:39] [15:07:39] ***Script completed successfully.***[15:07:55] [RadarAPI]: ar1.SelectCaptureDevice("TDA2XX")[15:07:55] [RadarAPI]: Status: Passed[15:07:59] [RadarAPI]: ar1.PowerOff_mult()[15:07:59] [RadarAPI]: Status: Passed[15:08:00] [RadarAPI]: ar1.FullReset(1)[15:08:00] [RadarAPI]: Status: Passed[15:08:00] [RadarAPI]: ar1.SOPControl_mult(1,4)[15:08:00] [RadarAPI]: Status: Passed[15:08:32] [RadarAPI]: ar1.PowerOn_mult(1, 0, 1000, 0,0)[15:08:32] Status: Failed, Error Type: RESP TIMEOUT[15:08:37] MSS Power Up async event was not received![15:09:17] [RadarAPI]: ar1.FullReset(1)[15:09:17] [RadarAPI]: Status: Passed[15:09:17] [RadarAPI]: ar1.SOPControl_mult(1,4)[15:09:17] [RadarAPI]: Status: Passed[15:09:50] [RadarAPI]: ar1.PowerOn_mult(1, 0, 1000, 0,0)[15:09:50] Status: Failed, Error Type: RESP TIMEOUT[15:09:55] MSS Power Up async event was not received!
,
Shine:
请问运行.lua的配置界面是怎么样的?
另外,AWR2243 ES是什么版本?不同的ES版本使用对应的DFP firmware。
,
Ruijie Zhu:
AWR2243 ES 版本是1.1
DFP的firmware我选的是文件加mmwave_dfp_02_02_03_01里面的,DFP官网上应用于2243的只看到这一版
运行完MIMO.lun的配置界面和再运行caoture.lun后的界面都是下图
打印的信息在运行完MIMO.lua后提示
[10:44:30] Master : FW Download Failed[10:44:30] [10:44:30] ***Script completed successfully.***
运行完capture.lua后就会提示
[10:46:35] TDA ARM Failed[10:46:35] [10:46:35] ***Script completed successfully.***
完整的打印信息如下
GM: ConstructorGM: Mon Dec 20 10:44:04 2021RSTD.Transmit("/Settings")[10:44:04] [10:44:04] ### Running Startup script: "C:\ti\mmwave_studio_03_00_00_14\mmWaveStudio\Scripts\Startup.lua" ###[10:44:04] RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")[10:44:04] RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")[10:44:04] Scripter ignored: Attempt to UnBuild() again or before Build.[10:44:04] RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\ti\\mmwave_studio_03_00_00_14\\mmWaveStudio\\Clients\\\\LabClient.dll")[10:44:04] RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")[10:44:04] RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")[10:44:04] RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")[10:44:04] RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")[10:44:04] RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")[10:44:04] RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\ti\\mmwave_studio_03_00_00_14\\mmWaveStudio\\RunTime\\SAL.dll")[10:44:04] RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")[10:44:04] RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")[10:44:04] RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")[10:44:04] RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")[10:44:04] RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")[10:44:04] RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")[10:44:04] RSTD.Transmit("/")[10:44:04] RSTD.SaveSettings(): Settings saved to "C:\Users\zhuruijie\AppData\Roaming\RSTD\config.xml"[10:44:04] RSTD.Build()[10:44:04] RSTD.SaveSettings(): Settings saved to "C:\Users\zhuruijie\AppData\Roaming\RSTD\config.xml"[10:44:04] RSTD.Transmit("/")[10:44:04] RSTD.AL_Build()[10:44:04] RSTD.AL_LoadXml()[10:44:04] RSTD.Transmit("/")[10:44:04] RSTD.AL_Init()[10:44:04] RSTD.Clients_Build()[10:44:04] GM: Init[10:44:04] GM: Loaded 'C:\ti\mmwave_studio_03_00_00_14\mmWaveStudio\Clients\\LabClient.dll'[10:44:04] GM: 1 Guest (s) init[10:44:04] GM: 1 Module(s) init[10:44:04] GM: 2 Tab (s) init[10:44:04] RSTD.Client_LoadXml()[10:44:04] [RadarAPI]: ar1.selectRadarMode(0)[10:44:04] [RadarAPI]: Status: Passed[10:44:04] Matlab Runtime Engine is installed[10:44:04] [RadarAPI]: Starting Matlab Engine..[10:44:07] [RadarAPI]: Matlab Engine Started![10:44:09] [RadarAPI]: ar1.selectCascadeMode(0)[10:44:09] [RadarAPI]: Status: Passed[10:44:09] [RadarAPI]: ar1.LoadSettings('C:\Users\zhuruijie\AppData\Roaming\RSTD\ar1gui.ini')[10:44:09] TESTING = false[10:44:09] RstdNet: Port 2777: Listening..[10:44:09] [10:44:09] ***Script completed successfully.***[10:44:19] [RadarAPI]: ar1.selectRadarMode(1)[10:44:19] [RadarAPI]: ar1.selectCascadeMode(1)[10:44:19] [RadarAPI]: Status: Passed[10:44:19] [RadarAPI]: Status: Passed[10:44:20] [RadarAPI]: ar1.SelectCaptureDevice("TDA2XX")[10:44:20] [RadarAPI]: Status: Passed[10:44:21] [RadarAPI]: TDAStatusCallback Event Registered[10:44:21] [RadarAPI]: registerTDAStatusCallback Status: Passed[10:44:21] [RadarAPI]: ar1.ConnectTDA("192.168.33.180", 5001, 15)[10:44:21] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:44:21] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_VERSION_INFO Async event recieved() with status 0. TDA Version : REL_VISION_SDK_03_07_01_00 Aug 5 2019 15:04:45[10:44:21] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:44:23] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:44:23] [RadarAPI]: ConnectTDACaptureCard Status: Passed[10:44:23] TDA Capture Card Status : CONNECTED![10:44:29] Setting up Studio for Cascade started..[10:44:29] [RadarAPI]: Connection to the TDA is already established![10:44:29] ConnectTDA Successful[10:44:29] selectCascadeMode Successful[10:44:29] Setting up Studio for Cascade ended..[10:44:29] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:44:29] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:44:30] [RadarAPI]: ar1.FullReset(1)[10:44:30] [RadarAPI]: Status: Passed[10:44:30] [RadarAPI]: ar1.SOPControl_mult(1,4)[10:44:30] [RadarAPI]: Status: Passed[10:44:30] Master : SOP Reset Successful[10:44:30] [RadarAPI]: ar1.PowerOn_mult(1, 0, 1000, 0,0)[10:44:30] [DeviceId-0] MSS power up done async event received![10:44:30] [RadarAPI]: Status: Passed[10:44:30] Master : SPI Connection Successful[10:44:30] [RadarAPI]: Error: Could not find file 'C:\ti\mmwave_dfp_02_02_02_01\firmware\xwr22xx_metaImage.bin'[10:44:30] Master : FW Download Failed[10:44:30] [10:44:30] ***Script completed successfully.***[10:46:25] Loops Remaining : 1[10:46:25] Starting TDA ARM…[10:46:25] [RadarAPI]: ar1.TDACaptureCard_StartRecord_mult(1, 0, 0, Cascade_Capture_22xx, 0)[10:46:25] Device 0 – Configuring TDA with Width : 0 and Height : 0[10:46:25] [RadarAPI]: Device 0 – setWidthAndHeight Status: Passed[10:46:25] Device 1 – Configuring TDA with Width : 0 and Height : 0[10:46:25] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:46:25] [RadarAPI]: Device 1 – setWidthAndHeight Status: Passed[10:46:25] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:46:25] Device 2 – Configuring TDA with Width : 0 and Height : 0[10:46:25] [RadarAPI]: Device 2 – setWidthAndHeight Status: Passed[10:46:25] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:46:25] Device 3 – Configuring TDA with Width : 0 and Height : 0[10:46:25] [RadarAPI]: Device 3 – setWidthAndHeight Status: Passed[10:46:25] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:46:25] Sending Frame Periodicity of 0 to TDA..[10:46:25] [RadarAPI]: Status: Passed. Frame Periodicity sent to TDA[10:46:25] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:46:25] Sending Capture Directory with name /mnt/ssd/Cascade_Capture_22xx to TDA..[10:46:25] [RadarAPI]: Status: Passed. Capture Directory sent to TDA[10:46:25] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:46:25] Sending File Allocation of 0 files to TDA..[10:46:25] [RadarAPI]: Status: Passed. File Allocation sent to TDA[10:46:25] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:46:25] Sending Enable Data Packaging (0 – 16-bit; 1 – 12-bit) with value of 0 to TDA..[10:46:25] [RadarAPI]: Status: Passed. Enable Data Packaging sent to TDA[10:46:25] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:46:25] Sending Number of frames to capture with value of 0 to TDA..[10:46:25] [RadarAPI]: Status: Passed. Number of frames to capture sent to TDA[10:46:25] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:46:25] [RadarAPI]: Status: Passed for notifying TDA about Creating Application[10:46:35] Create Application Response from Capture Card timed out!![10:46:35] TDA ARM Failed[10:46:35] [10:46:35] ***Script completed successfully.***[10:47:07] [RadarAPI]: ar1.SelectCaptureDevice("TDA2XX")[10:47:07] [RadarAPI]: Status: Passed
,
Chris Meng:
Ruijie Zhu 说: Error: Could not find file 'C:\ti\mmwave_dfp_02_02_02_01\firmware\xwr22xx_metaImage.bin'
请在LUA脚本里修改正确的firmware地址。
,
Ruijie Zhu:
你好,我修改了脚本以后,先运行MIMO脚本,然后再运行capture脚本,同时也打开了WinSCP,但是提示连接超时
这种状态说说明数据已经捕捉到了,只是无法通过以太网发给PC吗?
[14:17:20] Starting Transfer files using WinSCP..[14:17:42] [RadarAPI]: Error: Network error: Connection to "192.168.33.180" timed out.[14:17:42] Transferring files FAILED!
如下是完整的打印信息
GM: Constructor
GM: Mon Dec 20 14:14:21 2021RSTD.Transmit("/Settings")[14:14:21] [14:14:21] ### Running Startup script: "C:\ti\mmwave_studio_03_00_00_14\mmWaveStudio\Scripts\Startup.lua" ###[14:14:21] RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")[14:14:21] RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")[14:14:21] Scripter ignored: Attempt to UnBuild() again or before Build.[14:14:21] RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\ti\\mmwave_studio_03_00_00_14\\mmWaveStudio\\Clients\\\\LabClient.dll")[14:14:21] RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")[14:14:21] RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")[14:14:21] RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")[14:14:21] RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")[14:14:21] RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")[14:14:21] RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\ti\\mmwave_studio_03_00_00_14\\mmWaveStudio\\RunTime\\SAL.dll")[14:14:21] RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")[14:14:21] RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")[14:14:21] RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")[14:14:21] RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")[14:14:21] RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")[14:14:21] RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")[14:14:21] RSTD.Transmit("/")[14:14:21] RSTD.SaveSettings(): Settings saved to "C:\Users\zhuruijie\AppData\Roaming\RSTD\config.xml"[14:14:21] RSTD.Build()[14:14:21] RSTD.SaveSettings(): Settings saved to "C:\Users\zhuruijie\AppData\Roaming\RSTD\config.xml"[14:14:21] RSTD.Transmit("/")[14:14:21] RSTD.AL_Build()[14:14:21] RSTD.AL_LoadXml()[14:14:21] RSTD.Transmit("/")[14:14:21] RSTD.AL_Init()[14:14:21] RSTD.Clients_Build()[14:14:21] GM: Init[14:14:21] GM: Loaded 'C:\ti\mmwave_studio_03_00_00_14\mmWaveStudio\Clients\\LabClient.dll'[14:14:21] GM: 1 Guest (s) init[14:14:21] GM: 1 Module(s) init[14:14:21] GM: 2 Tab (s) init[14:14:21] RSTD.Client_LoadXml()[14:14:21] [RadarAPI]: ar1.selectRadarMode(0)[14:14:21] [RadarAPI]: Status: Passed[14:14:21] Matlab Runtime Engine is installed[14:14:21] [RadarAPI]: Starting Matlab Engine..[14:14:25] [RadarAPI]: Matlab Engine Started![14:14:26] [RadarAPI]: ar1.selectCascadeMode(0)[14:14:26] [RadarAPI]: Status: Passed[14:14:26] [RadarAPI]: ar1.LoadSettings('C:\Users\zhuruijie\AppData\Roaming\RSTD\ar1gui.ini')[14:14:26] TESTING = false[14:14:26] RstdNet: Port 2777: Listening..[14:14:27] [14:14:27] ***Script completed successfully.***[14:14:50] [RadarAPI]: ar1.selectRadarMode(1)[14:14:51] [RadarAPI]: ar1.selectCascadeMode(1)[14:14:51] [RadarAPI]: Status: Passed[14:14:51] [RadarAPI]: Status: Passed[14:14:51] [RadarAPI]: ar1.SelectCaptureDevice("TDA2XX")[14:14:51] [RadarAPI]: Status: Passed[14:14:52] [RadarAPI]: TDAStatusCallback Event Registered[14:14:52] [RadarAPI]: registerTDAStatusCallback Status: Passed[14:14:52] [RadarAPI]: ar1.ConnectTDA("192.168.33.180", 5001, 15)[14:14:52] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:14:52] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:14:52] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_VERSION_INFO Async event recieved() with status 0. TDA Version : REL_VISION_SDK_03_07_01_00 Aug 5 2019 15:04:45[14:14:52] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:14:54] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:14:54] [RadarAPI]: ConnectTDACaptureCard Status: Passed[14:14:54] TDA Capture Card Status : CONNECTED![14:16:31] Setting up Studio for Cascade started..[14:16:31] [RadarAPI]: Connection to the TDA is already established![14:16:31] ConnectTDA Successful[14:16:31] selectCascadeMode Successful[14:16:31] Setting up Studio for Cascade ended..[14:16:31] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:16:32] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:16:32] [RadarAPI]: ar1.FullReset(1)[14:16:32] [RadarAPI]: Status: Passed[14:16:32] [RadarAPI]: ar1.SOPControl_mult(1,4)[14:16:32] [RadarAPI]: Status: Passed[14:16:32] Master : SOP Reset Successful[14:16:32] [RadarAPI]: ar1.PowerOn_mult(1, 0, 1000, 0,0)[14:16:32] [RadarAPI]: Status: Passed[14:16:32] [DeviceId-0] MSS power up done async event received![14:16:32] Master : SPI Connection Successful[14:16:32] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(1, C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin)[14:16:35] Master : FW Download Successful[14:16:36] [RadarAPI]: ar1.SelectChipVersion("AR1243")[14:16:36] [RadarAPI]: Status: Passed[14:16:36] [RadarAPI]: ar1.SelectChipVersion("AR1243")[14:16:36] [RadarAPI]: Status: Passed[14:16:36] [RadarAPI]: ar1.deviceVariantSelection("XWR2243")[14:16:36] [RadarAPI]: Status: Passed[14:16:36] [RadarAPI]: ar1.frequencyBandSelection("77G")[14:16:36] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[14:16:36] [RadarAPI]: Status: Passed[14:16:36] Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[14:16:36] [RadarAPI]: ar1.RfEnable_mult(1)[14:16:37] [DeviceId-0] BSS power up done async event received![14:16:37] [RadarAPI]: Status: Passed[14:16:38] Master : RF Power Up Successful[14:16:38] [RadarAPI]: ar1.ChanNAdcConfig_mult(1, 1, 1, 1, 1, 1, 1, 1, 2, 1, 0, 1)[14:16:38] [RadarAPI]: Status: Passed[14:16:38] Master : Channel & ADC Configuration Successful[14:16:38] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:16:39] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:16:39] [RadarAPI]: ar1.FullReset(2)[14:16:39] [RadarAPI]: Status: Passed[14:16:39] [RadarAPI]: ar1.SOPControl_mult(2,4)[14:16:39] [RadarAPI]: Status: Passed[14:16:39] Device 2 : SOP Reset Successful[14:16:40] [DeviceId-1] MSS power up done async event received![14:16:40] [RadarAPI]: ar1.AddDevice(2)[14:16:40] [RadarAPI]: Status: Passed[14:16:40] Device 2 : SPI Connection Successful[14:16:40] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:16:40] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:16:40] [RadarAPI]: ar1.FullReset(4)[14:16:40] [RadarAPI]: Status: Passed[14:16:40] [RadarAPI]: ar1.SOPControl_mult(4,4)[14:16:40] [RadarAPI]: Status: Passed[14:16:40] Device 3 : SOP Reset Successful[14:16:41] [DeviceId-2] MSS power up done async event received![14:16:41] [RadarAPI]: ar1.AddDevice(4)[14:16:41] [RadarAPI]: Status: Passed[14:16:41] Device 3 : SPI Connection Successful[14:16:41] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:16:41] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:16:41] [RadarAPI]: ar1.FullReset(8)[14:16:41] [RadarAPI]: Status: Passed[14:16:41] [RadarAPI]: ar1.SOPControl_mult(8,4)[14:16:41] [RadarAPI]: Status: Passed[14:16:41] Device 4 : SOP Reset Successful[14:16:42] [DeviceId-3] MSS power up done async event received![14:16:42] [RadarAPI]: ar1.AddDevice(8)[14:16:42] [RadarAPI]: Status: Passed[14:16:42] Device 4 : SPI Connection Successful[14:16:42] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(14, C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin)[14:16:45] Slaves : FW Download Successful[14:16:46] [RadarAPI]: ar1.SelectChipVersion("AR1243")[14:16:46] [RadarAPI]: Status: Passed[14:16:46] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[14:16:46] [RadarAPI]: Status: Passed[14:16:46] Slave1 Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[14:16:47] [RadarAPI]: ar1.SelectChipVersion("AR1243")[14:16:47] [RadarAPI]: Status: Passed[14:16:47] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[14:16:47] [RadarAPI]: Status: Passed[14:16:47] Slave2 Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[14:16:48] [RadarAPI]: ar1.SelectChipVersion("AR1243")[14:16:48] [RadarAPI]: Status: Passed[14:16:48] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[14:16:48] [RadarAPI]: Status: Passed[14:16:48] Slave3 Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[14:16:48] [RadarAPI]: ar1.RfEnable_mult(14)[14:16:48] [DeviceId-3] BSS power up done async event received![14:16:48] [DeviceId-1] BSS power up done async event received![14:16:48] [DeviceId-2] BSS power up done async event received![14:16:48] [RadarAPI]: Status: Passed[14:16:52] Slaves : RF Power Up Successful[14:16:52] [RadarAPI]: ar1.ChanNAdcConfig_mult(14, 1, 1, 1, 1, 1, 1, 1, 2, 1, 0, 2)[14:16:53] [RadarAPI]: Status: Passed[14:16:53] Slaves : Channel & ADC Configuration Successful[14:16:53] [RadarAPI]: ar1.RfLdoBypassConfig_mult(15, 0xF)[14:16:53] [RadarAPI]: Status: Passed[14:16:53] LDO Bypass Successful[14:16:53] [RadarAPI]: ar1.LPModConfig_mult(15, 0,0)[14:16:53] [RadarAPI]: Status: Passed[14:16:53] Low Power Mode Configuration Successful[14:16:53] [RadarAPI]: ar1.SetMiscConfig_mult(15, 1, 0, 0, 0)[14:16:53] [RadarAPI]: Status: Passed[14:16:53] Misc Control Configuration Successful[14:16:53] [RadarAPI]: ar1.RfInitCalibConfig_mult(15, 1, 1, 1, 1, 1, 1, 1, 65537)[14:16:53] [RadarAPI]: Status: Passed[14:16:53] RF Init Calibration Successful[14:16:53] [RadarAPI]: ar1.RfInit_mult(15)[14:16:53] [DeviceId-0] RF Init async event received![14:16:53] [DeviceId-1] RF Init async event received![14:16:53] [RadarAPI]: Time stamp, Temperture: 16556,29; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; TxPhase Status, Update: 1, 1; RxIQMM Status, Update: 1, 1; [14:16:53] [RadarAPI]: Time stamp, Temperture: 5306,29; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; TxPhase Status, Update: 1, 1; RxIQMM Status, Update: 1, 1; [14:16:53] [DeviceId-2] RF Init async event received![14:16:53] [DeviceId-3] RF Init async event received![14:16:53] [RadarAPI]: Status: Passed[14:16:53] [RadarAPI]: Time stamp, Temperture: 5306,29; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; TxPhase Status, Update: 1, 1; RxIQMM Status, Update: 1, 1; [14:16:53] [RadarAPI]: Time stamp, Temperture: 5306,29; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; TxPhase Status, Update: 1, 1; RxIQMM Status, Update: 1, 1; [14:16:53] RF Init Successful[14:16:53] [RadarAPI]: ar1.DataPathConfig_mult(15, 0, 1, 0)[14:16:53] [RadarAPI]: Status: Passed[14:16:53] Data Path Configuration Successful[14:16:53] [RadarAPI]: ar1.LvdsClkConfig_mult(15, 1,1)[14:16:53] [RadarAPI]: Status: Passed[14:16:53] Clock Configuration Successful[14:16:53] [RadarAPI]: ar1.CSI2LaneConfig_mult(15, 1, 0, 2, 0, 4, 0, 5,0,3,0, 0)[14:16:54] [RadarAPI]: Status: Passed[14:16:54] CSI2 Configuration Successful[14:16:54] [RadarAPI]: ar1.ProfileConfig_mult(15, 0, 77, 5, 6, 40, 0, 0, 0, 0, 0, 0, 78.986, 0, 256, 8000, 0, 0, 48)[14:16:54] [RadarAPI]: Status: Passed[14:16:54] Profile Configuration successful[14:16:54] [RadarAPI]: ar1.ChirpConfig_mult(1, 0, 0, 0, 0, 0, 0, 0, 0, 0,0)[14:16:54] [RadarAPI]: Status: Passed[14:16:54] Device 1 : Chirp 0 Configuration successful[14:16:54] [RadarAPI]: ar1.ChirpConfig_mult(1, 1, 1, 0, 0, 0, 0, 0, 0, 0,0)[14:16:54] [RadarAPI]: Status: Passed[14:16:54] Device 1 : Chirp 1 Configuration successful[14:16:54] [RadarAPI]: ar1.ChirpConfig_mult(1, 2, 2, 0, 0, 0, 0, 0, 0, 0,0)[14:16:54] [RadarAPI]: Status: Passed[14:16:54] Device 1 : Chirp 2 Configuration successful[14:16:54] [RadarAPI]: ar1.ChirpConfig_mult(1, 3, 3, 0, 0, 0, 0, 0, 0, 0,0)[14:16:54] [RadarAPI]: Status: Passed[14:16:54] Device 1 : Chirp 3 Configuration successful[14:16:54] [RadarAPI]: ar1.ChirpConfig_mult(1, 4, 4, 0, 0, 0, 0, 0, 0, 0,0)[14:16:54] [RadarAPI]: Status: Passed[14:16:54] Device 1 : Chirp 4 Configuration successful[14:16:54] [RadarAPI]: ar1.ChirpConfig_mult(1, 5, 5, 0, 0, 0, 0, 0, 0, 0,0)[14:16:54] [RadarAPI]: Status: Passed[14:16:54] Device 1 : Chirp 5 Configuration successful[14:16:54] [RadarAPI]: ar1.ChirpConfig_mult(1, 6, 6, 0, 0, 0, 0, 0, 0, 0,0)[14:16:54] [RadarAPI]: Status: Passed[14:16:54] Device 1 : Chirp 6 Configuration successful[14:16:54] [RadarAPI]: ar1.ChirpConfig_mult(1, 7, 7, 0, 0, 0, 0, 0, 0, 0,0)[14:16:54] [RadarAPI]: Status: Passed[14:16:54] Device 1 : Chirp 7 Configuration successful[14:16:54] [RadarAPI]: ar1.ChirpConfig_mult(1, 8, 8, 0, 0, 0, 0, 0, 0, 0,0)[14:16:54] [RadarAPI]: Status: Passed[14:16:54] Device 1 : Chirp 8 Configuration successful[14:16:54] [RadarAPI]: ar1.ChirpConfig_mult(1, 9, 9, 0, 0, 0, 0, 0, 0, 0,1)[14:16:55] [RadarAPI]: Status: Passed[14:16:55] Device 1 : Chirp 9 Configuration successful[14:16:55] [RadarAPI]: ar1.ChirpConfig_mult(1, 10, 10, 0, 0, 0, 0, 0, 0, 1,0)[14:16:55] [RadarAPI]: Status: Passed[14:16:55] Device 1 : Chirp 10 Configuration successful[14:16:55] [RadarAPI]: ar1.ChirpConfig_mult(1, 11, 11, 0, 0, 0, 0, 0, 1, 0,0)[14:16:55] [RadarAPI]: Status: Passed[14:16:55] Device 1 : Chirp 11 Configuration successful[14:16:55] [RadarAPI]: ar1.ChirpConfig_mult(2, 0, 0, 0, 0, 0, 0, 0, 0, 0,0)[14:16:55] [RadarAPI]: Status: Passed[14:16:55] Device 2 : Chirp 0 Configuration successful[14:16:55] [RadarAPI]: ar1.ChirpConfig_mult(2, 1, 1, 0, 0, 0, 0, 0, 0, 0,0)[14:16:55] [RadarAPI]: Status: Passed[14:16:55] Device 2 : Chirp 1 Configuration successful[14:16:55] [RadarAPI]: ar1.ChirpConfig_mult(2, 2, 2, 0, 0, 0, 0, 0, 0, 0,0)[14:16:55] [RadarAPI]: Status: Passed[14:16:55] Device 2 : Chirp 2 Configuration successful[14:16:55] [RadarAPI]: ar1.ChirpConfig_mult(2, 3, 3, 0, 0, 0, 0, 0, 0, 0,0)[14:16:55] [RadarAPI]: Status: Passed[14:16:55] Device 2 : Chirp 3 Configuration successful[14:16:55] [RadarAPI]: ar1.ChirpConfig_mult(2, 4, 4, 0, 0, 0, 0, 0, 0, 0,0)[14:16:56] [RadarAPI]: Status: Passed[14:16:56] Device 2 : Chirp 4 Configuration successful[14:16:56] [RadarAPI]: ar1.ChirpConfig_mult(2, 5, 5, 0, 0, 0, 0, 0, 0, 0,0)[14:16:56] [RadarAPI]: Status: Passed[14:16:56] Device 2 : Chirp 5 Configuration successful[14:16:56] [RadarAPI]: ar1.ChirpConfig_mult(2, 6, 6, 0, 0, 0, 0, 0, 0, 0,1)[14:16:56] [RadarAPI]: Status: Passed[14:16:56] Device 2 : Chirp 6 Configuration successful[14:16:56] [RadarAPI]: ar1.ChirpConfig_mult(2, 7, 7, 0, 0, 0, 0, 0, 0, 1,0)[14:16:56] [RadarAPI]: Status: Passed[14:16:56] Device 2 : Chirp 7 Configuration successful[14:16:56] [RadarAPI]: ar1.ChirpConfig_mult(2, 8, 8, 0, 0, 0, 0, 0, 1, 0,0)[14:16:56] [RadarAPI]: Status: Passed[14:16:56] Device 2 : Chirp 8 Configuration successful[14:16:56] [RadarAPI]: ar1.ChirpConfig_mult(2, 9, 9, 0, 0, 0, 0, 0, 0, 0,0)[14:16:56] [RadarAPI]: Status: Passed[14:16:56] Device 2 : Chirp 9 Configuration successful[14:16:56] [RadarAPI]: ar1.ChirpConfig_mult(2, 10, 10, 0, 0, 0, 0, 0, 0, 0,0)[14:16:56] [RadarAPI]: Status: Passed[14:16:56] Device 2 : Chirp 10 Configuration successful[14:16:56] [RadarAPI]: ar1.ChirpConfig_mult(2, 11, 11, 0, 0, 0, 0, 0, 0, 0,0)[14:16:56] [RadarAPI]: Status: Passed[14:16:56] Device 2 : Chirp 11 Configuration successful[14:16:56] [RadarAPI]: ar1.ChirpConfig_mult(4, 0, 0, 0, 0, 0, 0, 0, 0, 0,0)[14:16:56] [RadarAPI]: Status: Passed[14:16:56] Device 3 : Chirp 0 Configuration successful[14:16:56] [RadarAPI]: ar1.ChirpConfig_mult(4, 1, 1, 0, 0, 0, 0, 0, 0, 0,0)[14:16:56] [RadarAPI]: Status: Passed[14:16:56] Device 3 : Chirp 1 Configuration successful[14:16:56] [RadarAPI]: ar1.ChirpConfig_mult(4, 2, 2, 0, 0, 0, 0, 0, 0, 0,0)[14:16:56] [RadarAPI]: Status: Passed[14:16:56] Device 3 : Chirp 2 Configuration successful[14:16:56] [RadarAPI]: ar1.ChirpConfig_mult(4, 3, 3, 0, 0, 0, 0, 0, 0, 0,1)[14:16:56] [RadarAPI]: Status: Passed[14:16:57] Device 3 : Chirp 3 Configuration successful[14:16:57] [RadarAPI]: ar1.ChirpConfig_mult(4, 4, 4, 0, 0, 0, 0, 0, 0, 1,0)[14:16:57] [RadarAPI]: Status: Passed[14:16:57] Device 3 : Chirp 4 Configuration successful[14:16:57] [RadarAPI]: ar1.ChirpConfig_mult(4, 5, 5, 0, 0, 0, 0, 0, 1, 0,0)[14:16:57] [RadarAPI]: Status: Passed[14:16:57] Device 3 : Chirp 5 Configuration successful[14:16:57] [RadarAPI]: ar1.ChirpConfig_mult(4, 6, 6, 0, 0, 0, 0, 0, 0, 0,0)[14:16:57] [RadarAPI]: Status: Passed[14:16:57] Device 3 : Chirp 6 Configuration successful[14:16:57] [RadarAPI]: ar1.ChirpConfig_mult(4, 7, 7, 0, 0, 0, 0, 0, 0, 0,0)[14:16:57] [RadarAPI]: Status: Passed[14:16:57] Device 3 : Chirp 7 Configuration successful[14:16:57] [RadarAPI]: ar1.ChirpConfig_mult(4, 8, 8, 0, 0, 0, 0, 0, 0, 0,0)[14:16:57] [RadarAPI]: Status: Passed[14:16:57] Device 3 : Chirp 8 Configuration successful[14:16:57] [RadarAPI]: ar1.ChirpConfig_mult(4, 9, 9, 0, 0, 0, 0, 0, 0, 0,0)[14:16:57] [RadarAPI]: Status: Passed[14:16:57] Device 3 : Chirp 9 Configuration successful[14:16:57] [RadarAPI]: ar1.ChirpConfig_mult(4, 10, 10, 0, 0, 0, 0, 0, 0, 0,0)[14:16:57] [RadarAPI]: Status: Passed[14:16:57] Device 3 : Chirp 10 Configuration successful[14:16:57] [RadarAPI]: ar1.ChirpConfig_mult(4, 11, 11, 0, 0, 0, 0, 0, 0, 0,0)[14:16:57] [RadarAPI]: Status: Passed[14:16:57] Device 3 : Chirp 11 Configuration successful[14:16:57] [RadarAPI]: ar1.ChirpConfig_mult(8, 0, 0, 0, 0, 0, 0, 0, 0, 0,1)[14:16:57] [RadarAPI]: Status: Passed[14:16:57] Device 4 : Chirp 0 Configuration successful[14:16:57] [RadarAPI]: ar1.ChirpConfig_mult(8, 1, 1, 0, 0, 0, 0, 0, 0, 1,0)[14:16:57] [RadarAPI]: Status: Passed[14:16:57] Device 4 : Chirp 1 Configuration successful[14:16:57] [RadarAPI]: ar1.ChirpConfig_mult(8, 2, 2, 0, 0, 0, 0, 0, 1, 0,0)[14:16:57] [RadarAPI]: Status: Passed[14:16:57] Device 4 : Chirp 2 Configuration successful[14:16:57] [RadarAPI]: ar1.ChirpConfig_mult(8, 3, 3, 0, 0, 0, 0, 0, 0, 0,0)[14:16:58] [RadarAPI]: Status: Passed[14:16:58] Device 4 : Chirp 3 Configuration successful[14:16:58] [RadarAPI]: ar1.ChirpConfig_mult(8, 4, 4, 0, 0, 0, 0, 0, 0, 0,0)[14:16:58] [RadarAPI]: Status: Passed[14:16:58] Device 4 : Chirp 4 Configuration successful[14:16:58] [RadarAPI]: ar1.ChirpConfig_mult(8, 5, 5, 0, 0, 0, 0, 0, 0, 0,0)[14:16:58] [RadarAPI]: Status: Passed[14:16:58] Device 4 : Chirp 5 Configuration successful[14:16:58] [RadarAPI]: ar1.ChirpConfig_mult(8, 6, 6, 0, 0, 0, 0, 0, 0, 0,0)[14:16:58] [RadarAPI]: Status: Passed[14:16:58] Device 4 : Chirp 6 Configuration successful[14:16:58] [RadarAPI]: ar1.ChirpConfig_mult(8, 7, 7, 0, 0, 0, 0, 0, 0, 0,0)[14:16:58] [RadarAPI]: Status: Passed[14:16:58] Device 4 : Chirp 7 Configuration successful[14:16:58] [RadarAPI]: ar1.ChirpConfig_mult(8, 8, 8, 0, 0, 0, 0, 0, 0, 0,0)[14:16:58] [RadarAPI]: Status: Passed[14:16:58] Device 4 : Chirp 8 Configuration successful[14:16:58] [RadarAPI]: ar1.ChirpConfig_mult(8, 9, 9, 0, 0, 0, 0, 0, 0, 0,0)[14:16:58] [RadarAPI]: Status: Passed[14:16:58] Device 4 : Chirp 9 Configuration successful[14:16:58] [RadarAPI]: ar1.ChirpConfig_mult(8, 10, 10, 0, 0, 0, 0, 0, 0, 0,0)[14:16:58] [RadarAPI]: Status: Passed[14:16:58] Device 4 : Chirp 10 Configuration successful[14:16:58] [RadarAPI]: ar1.ChirpConfig_mult(8, 11, 11, 0, 0, 0, 0, 0, 0, 0,0)[14:16:58] [RadarAPI]: Status: Passed[14:16:58] Device 4 : Chirp 11 Configuration successful[14:16:58] Test Source Already Disabled…!!![14:16:58] [RadarAPI]: ar1.DisableTestSource_mult(1,0)[14:16:58] [RadarAPI]: Status: Passed[14:16:58] [RadarAPI]: ar1.FrameConfig_mult(1, 0, 11, 10, 64, 100, 0, 1)[14:16:59] [RadarAPI]: Status: Passed[14:16:59] Master : Frame Configuration successful[14:16:59] Test Source Already Disabled…!!![14:16:59] [RadarAPI]: ar1.DisableTestSource_mult(14,0)[14:16:59] [RadarAPI]: Status: Passed[14:16:59] [RadarAPI]: ar1.FrameConfig_mult(14, 0, 11, 10, 64, 100, 0, 2)[14:16:59] [RadarAPI]: Status: Passed[14:16:59] Slaves : Frame Configuration successful[14:16:59] [14:16:59] ***Script completed successfully.***[14:17:14] Loops Remaining : 1[14:17:14] Starting TDA ARM…[14:17:14] [RadarAPI]: ar1.TDACaptureCard_StartRecord_mult(1, 0, 0, Cascade_Capture_22xx, 0)[14:17:14] Device 0 – Configuring TDA with Width : 2048 and Height : 768[14:17:14] [RadarAPI]: Device 0 – setWidthAndHeight Status: Passed[14:17:14] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:17:14] Device 1 – Configuring TDA with Width : 2048 and Height : 768[14:17:14] [RadarAPI]: Device 1 – setWidthAndHeight Status: Passed[14:17:14] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:17:14] Device 2 – Configuring TDA with Width : 2048 and Height : 768[14:17:14] [RadarAPI]: Device 2 – setWidthAndHeight Status: Passed[14:17:14] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:17:14] Device 3 – Configuring TDA with Width : 2048 and Height : 768[14:17:14] [RadarAPI]: Device 3 – setWidthAndHeight Status: Passed[14:17:14] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:17:14] Sending Frame Periodicity of 100 to TDA..[14:17:14] [RadarAPI]: Status: Passed. Frame Periodicity sent to TDA[14:17:14] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:17:14] Sending Capture Directory with name /mnt/ssd/Cascade_Capture_22xx to TDA..[14:17:14] [RadarAPI]: Status: Passed. Capture Directory sent to TDA[14:17:14] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:17:14] Sending File Allocation of 0 files to TDA..[14:17:14] [RadarAPI]: Status: Passed. File Allocation sent to TDA[14:17:14] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:17:14] Sending Enable Data Packaging (0 – 16-bit; 1 – 12-bit) with value of 0 to TDA..[14:17:14] [RadarAPI]: Status: Passed. Enable Data Packaging sent to TDA[14:17:14] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:17:14] Sending Number of frames to capture with value of 0 to TDA..[14:17:14] [RadarAPI]: Status: Passed. Number of frames to capture sent to TDA[14:17:14] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:17:14] [RadarAPI]: Status: Passed for notifying TDA about Creating Application[14:17:14] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:17:14] [RadarAPI]: Status: Passed for notifying TDA about Start Frame[14:17:14] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [14:17:15] TDA ARM Successful[14:17:16] Starting Frame Trigger sequence…[14:17:16] [RadarAPI]: ar1.StartFrame_mult(8)[14:17:16] [RadarAPI]: Status: Passed[14:17:16] Device 4 : Start Frame Successful[14:17:16] [RadarAPI]: ar1.StartFrame_mult(4)[14:17:16] [DeviceId-3] Frame start async event received![14:17:16] [RadarAPI]: Status: Passed[14:17:16] Device 3 : Start Frame Successful[14:17:16] [RadarAPI]: ar1.StartFrame_mult(2)[14:17:16] [RadarAPI]: Status: Passed[14:17:16] [DeviceId-2] Frame start async event received![14:17:16] Device 2 : Start Frame Successful[14:17:16] [RadarAPI]: ar1.StartFrame_mult(1)[14:17:16] [DeviceId-1] Frame start async event received![14:17:16] [RadarAPI]: Status: Passed[14:17:16] Device 1 : Start Frame Successful[14:17:16] Capturing AWR device data to the TDA SSD…[14:17:16] [DeviceId-0] Frame start async event received![14:17:17] [RadarAPI]: Frame Ended[14:17:17] CAPTURE_RESPONSE_NETWORK_ERROR Async event recieved! Connection error! Please reboot the TDA board[14:17:17] [RadarAPI]: ar1.RemoveDevice(8)[14:17:17] [RadarAPI]: Status: Passed[14:17:17] [RadarAPI]: ar1.RemoveDevice(4)[14:17:17] [RadarAPI]: Status: Passed[14:17:17] [RadarAPI]: ar1.RemoveDevice(2)[14:17:17] [RadarAPI]: Status: Passed[14:17:17] [RadarAPI]: ar1.PowerOff_mult()[14:17:17] [RadarAPI]: Status: Passed[14:17:18] Capture sequence completed…[14:17:18] [RadarAPI]: ar1.FullReset(1)[14:17:18] [RadarAPI]: Status: Passed[14:17:18] [RadarAPI]: ar1.SOPControl_mult(1,4)[14:17:18] [RadarAPI]: Status: Passed[14:17:18] TDA Capture Card Status : DISCONNECTED![14:17:20] Starting Transfer files using WinSCP..[14:17:42] [RadarAPI]: Error: Network error: Connection to "192.168.33.180" timed out.[14:17:42] Transferring files FAILED![14:17:43] [14:17:43] ***Script completed successfully.***
WinSCP截图
另外sensorconfig界面已经显示Framing
,
Chris Meng:
你好,
在winSCP里是否已经可以看到采集的数据?
请问你的电脑上是否有杀毒软件、防火墙导致网络的问题?能否关闭后尝试。
,
Ruijie Zhu:
你好,winSCP里面显示是空的,我把杀毒软件、防火墙都关了,问题变成了如下的状态,而且在运行cascade capture.lun时,以太网端口的指示灯会灭掉,脚本运行完才亮,是以太网没通吗?Demo板如何判断以太网通没通?谢谢。
[15:44:45] [RadarAPI]: ar1.StartFrame_mult(1)[15:44:45] [DeviceId-1] Frame start async event received![15:44:45] [RadarAPI]: Status: Passed[15:44:45] Device 1 : Start Frame Successful[15:44:45] Capturing AWR device data to the TDA SSD…[15:44:45] [DeviceId-0] Frame start async event received![15:44:46] [RadarAPI]: Frame Ended[15:44:47] Capture sequence completed…[15:44:49] Starting Transfer files using WinSCP..[15:44:49] [RadarAPI]: Error: Network error: No route to host "192.168.33.180".[15:44:49] Transferring files FAILED![15:44:49] [15:44:49] ***Script completed successfully.***
,
Chris Meng:
Ruijie Zhu 说:[14:17:17] CAPTURE_RESPONSE_NETWORK_ERROR Async event recieved! Connection error! Please reboot the TDA board
请问你使用的12V电源的电流是多少?是5A以上么?
https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/933766/awr1243-capture_response_network_error-async-event-recieved-connection-error-please-reboot-the-tda-board
,
Ruijie Zhu:
你好,现在问题已经解决,多谢支持
,
Chris Meng:
你好,
能否分享一下问题是如何解决的么?谢谢!
,
Ruijie Zhu:
前面是脚本运行错误,无法捕捉数据,应该是脚本里面的参数跟现在的版本不匹配;
脚本运行OK,数据无法发送到PC端,应该是电源限流了,把电源电流调到最大就可以了;
谢谢。
,
Chris Meng:
你好,
谢谢分享!