在Debug时,出现
Error connecting to the target:
(Error -1135 @ 0x0)
The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation.
(Emulation package 5.0.872.0)
我想问一下如何解决此问题!!!
此问题是系统问题吗???
Forrest:
报错是说仿真器碰到错误,建议楼主确认仿真器的连接。楼主用的是哪里的XDS100仿真器?
一般而言这需要做交叉实验确认问题原因:仿真器,开发板,CCS,仿真器驱动,电脑….
在Debug时,出现
Error connecting to the target:
(Error -1135 @ 0x0)
The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation.
(Emulation package 5.0.872.0)
我想问一下如何解决此问题!!!
此问题是系统问题吗???
Richard Ma:
楼主请确认下驱动程序是否装好了,在设备管理器中是不是所有设备都正确安装了驱动。
在Debug时,出现
Error connecting to the target:
(Error -1135 @ 0x0)
The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation.
(Emulation package 5.0.872.0)
我想问一下如何解决此问题!!!
此问题是系统问题吗???
Steven Liu1:
回复 Eric Ma:
Eric Ma
謝謝指點,現在已經找到錯誤了!!!
在Debug时,出现
Error connecting to the target:
(Error -1135 @ 0x0)
The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation.
(Emulation package 5.0.872.0)
我想问一下如何解决此问题!!!
此问题是系统问题吗???
Steven Liu1:
回复 Richard Ma:
Richard Ma
謝謝指點,現已找到錯誤!!!
在Debug时,出现
Error connecting to the target:
(Error -1135 @ 0x0)
The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation.
(Emulation package 5.0.872.0)
我想问一下如何解决此问题!!!
此问题是系统问题吗???
Steven Liu1:
回复 Forrest:
Forrest
謝謝指點,現已找到錯誤!!!
在Debug时,出现
Error connecting to the target:
(Error -1135 @ 0x0)
The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation.
(Emulation package 5.0.872.0)
我想问一下如何解决此问题!!!
此问题是系统问题吗???
Young Hu:
回复 Eric Ma:
这个问题是经常遇到的问题,要不就是连接,要不就是电源,晶振,要不就是驱动。。很棘手的一个问题。