CCS6.1工程编译不通过：fatal error #6001: cannot open file "D:/CCS6.1/ccsv6": Permission denied-TI中文支持网

Description Resource Path Location Type
#6001 cannot open file "D:/CCS6.1/ccsv6": Permission denied IC421_Master C/C++ Problem，请问怎么解决呢

Susan Yang：您的图片未能成功上传，请您重新上传一下，谢谢！

另外能否请您稍微详细说明一下您现在的情况？

Description Resource Path Location Type
#6001 cannot open file "D:/CCS6.1/ccsv6": Permission denied IC421_Master C/C++ Problem，请问怎么解决呢

ZHG：

回复 Susan Yang:

Description Resource Path Location Type
#6001 cannot open file "D:/CCS6.1/ccsv6": Permission denied IC421_Master C/C++ Problem，请问怎么解决呢

Susan Yang：

回复 ZHG:

请问能否给出您的完整错误提示？
您可以先看一下

e2e.ti.com/…/566031

给出的建议

Description Resource Path Location Type
#6001 cannot open file "D:/CCS6.1/ccsv6": Permission denied IC421_Master C/C++ Problem，请问怎么解决呢

ZHG：

回复 Susan Yang:

**** Clean-only build of configuration Debug for project IC421_Master ****

"C:\\ti\\ccsv6\\utils\\bin\\gmake" -k clean

DEL /F "IC42_Master.out" "IC42_Master.hex"

找不到 E:\1_SHANGFUDIAN\SHANGFUDIAN_EMC_DEMO\20181129Code_IC421_M\AppProject\Project\Debug\IC42_Master.out

DEL /F "KalmanFilter.pp" "RadarSdk.pp" "calc.pp" "data_pro.pp" "track_pro.pp" "user\FreCalib.pp" "user\fpufft.pp" "user\timer.pp" "src\F2837xS_Adc.pp" "src\F2837xS_CpuTimers.pp" "src\F2837xS_DefaultISR.pp" "src\F2837xS_Dma.pp" "src\F2837xS_ECap.pp" "src\F2837xS_EPwm.pp" "src\F2837xS_Emif.pp" "src\F2837xS_GlobalVariableDefs.pp" "src\F2837xS_Gpio.pp" "src\F2837xS_PieCtrl.pp" "src\F2837xS_PieVect.pp" "src\F2837xS_SysCtrl.pp" "drv\WatchDog.pp" "drv\interrupt.pp" "drv\sysctl.pp" "drv\systick.pp" "drv\uart.pp" "drv\uartstdio.pp" "drv\usb.pp" "drv\usb_bulk_structs.pp" "drv\usb_hal.pp" "drv\usbbuffer.pp" "drv\usbdbulk.pp" "drv\usbdcdc.pp" "drv\usbdcomp.pp" "drv\usbdconfig.pp" "drv\usbkeyboardmap.pp" "drv\usbmode.pp" "FLASH\FlashProg.pp" "FLASH\IEE1.pp" "FLASH\IEE1Ctrl.pp" "CAN\AppProt.pp" "CAN\CanDecode.pp" "CAN\CfgMgr.pp" "CAN\DTCMgr.pp" "CAN\IEE1.pp" "CAN\LinkMsg.pp" "CAN\Link_can.pp" "CAN\NetProt.pp" "CAN\Prottimeout.pp" "CAN\Reset.pp" "CAN\SecurityAlgorithm.pp" "CAN\can.pp" "CAN\candriver.pp" "CAN\power.pp"

DEL /F "KalmanFilter.obj" "RadarSdk.obj" "calc.obj" "data_pro.obj" "track_pro.obj" "user\FreCalib.obj" "user\fpufft.obj" "user\timer.obj" "src\DCSM_Z1_ZoneSelectBlock.obj" "src\F2837xS_Adc.obj" "src\F2837xS_CodeStartBranch.obj" "src\F2837xS_CpuTimers.obj" "src\F2837xS_DefaultISR.obj" "src\F2837xS_Dma.obj" "src\F2837xS_ECap.obj" "src\F2837xS_EPwm.obj" "src\F2837xS_Emif.obj" "src\F2837xS_GlobalVariableDefs.obj" "src\F2837xS_Gpio.obj" "src\F2837xS_PieCtrl.obj" "src\F2837xS_PieVect.obj" "src\F2837xS_SysCtrl.obj" "src\F2837xS_usDelay.obj" "drv\WatchDog.obj" "drv\interrupt.obj" "drv\sysctl.obj" "drv\systick.obj" "drv\uart.obj" "drv\uartstdio.obj" "drv\usb.obj" "drv\usb_bulk_structs.obj" "drv\usb_hal.obj" "drv\usbbuffer.obj" "drv\usbdbulk.obj" "drv\usbdcdc.obj" "drv\usbdcomp.obj" "drv\usbdconfig.obj" "drv\usbkeyboardmap.obj" "drv\usbmode.obj" "FLASH\Flash2837xs_CsmKeys.obj" "FLASH\FlashProg.obj" "FLASH\IEE1.obj" "FLASH\IEE1Ctrl.obj" "CAN\AppProt.obj" "CAN\CanDecode.obj" "CAN\CfgMgr.obj" "CAN\DTCMgr.obj"

DEL /F "CAN\IEE1.obj" "CAN\LinkMsg.obj" "CAN\Link_can.obj" "CAN\NetProt.obj" "CAN\Prottimeout.obj" "CAN\Reset.obj" "CAN\SecurityAlgorithm.obj" "CAN\can.obj" "CAN\candriver.obj" "CAN\power.obj"

DEL /F "src\DCSM_Z1_ZoneSelectBlock.pp" "src\F2837xS_CodeStartBranch.pp" "src\F2837xS_usDelay.pp" "FLASH\Flash2837xs_CsmKeys.pp"

找不到 E:\1_SHANGFUDIAN\SHANGFUDIAN_EMC_DEMO\20181129Code_IC421_M\AppProject\Project\Debug\src\DCSM_Z1_ZoneSelectBlock.pp

找不到 E:\1_SHANGFUDIAN\SHANGFUDIAN_EMC_DEMO\20181129Code_IC421_M\AppProject\Project\Debug\FLASH\Flash2837xs_CsmKeys.pp

'Finished clean'

' '

**** Build Finished ****

**** Build of configuration Debug for project IC421_Master ****

"C:\\ti\\ccsv6\\utils\\bin\\gmake" -k all

'Building file: ../KalmanFilter.c'

'Invoking: C2000 Compiler'

"C:/ti/ccsv6/tools/compiler/ti-cgt-c2000_6.4.2/bin/cl2000" -v28 -ml -mt –float_support=fpu32 –tmu_support=tmu0 –include_path="C:/ti/ccsv6/tools/compiler/ti-cgt-c2000_6.4.2/include" –include_path="E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/F2837xS_common/include" –include_path="E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/F2837xS_headers/include" –include_path="E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/Project/CAN" –include_path="E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/Project/drv" –include_path="E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/Project/FLASH" –include_path="E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/Project/src" –include_path="E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/Project/include" –include_path="E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/Project/lib" –include_path="E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/Project/user" –advice:performance=all -g –diag_warning=225 –display_error_number –diag_wrap=off –preproc_with_compile –preproc_dependency="KalmanFilter.pp" "../KalmanFilter.c"

"../KalmanFilter.c", line 36 (col. 73): remark #2614-D: Use –fp_mode=relaxed to enable TMU hardware support for FP division.

'Finished building: ../KalmanFilter.c'

' '

'Building file: ../RadarSdk.c'

'Invoking: C2000 Compiler'

"../RadarSdk.c", line 776 (col. 48): remark #2614-D: Use –fp_mode=relaxed to enable TMU hardware support for FP division.

warning: "../RadarSdk.c", line 1395: Assembly statement "ESTOP0" creates a label, which may not be what was intended. Use a colon after a label or a space before a non-label to silence the warning.

'Finished building: ../RadarSdk.c'

' '

'Building file: ../calc.c'

'Invoking: C2000 Compiler'

"../calc.c", line 16: warning #179-D: variable "deltaDop2" was declared but never referenced

"../calc.c", line 20: warning #179-D: variable "ThresholdYSpeed" was declared but never referenced

"../calc.c", line 497: warning #179-D: variable "i" was declared but never referenced

"../calc.c", line 526: warning #179-D: variable "inc" was declared but never referenced

"../calc.c", line 527: warning #179-D: variable "leftamp" was declared but never referenced

"../calc.c", line 527: warning #179-D: variable "rightamp" was declared but never referenced

"../calc.c", line 626: warning #179-D: variable "ampTemp" was declared but never referenced

"../calc.c", line 746: warning #552-D: variable "amp2" was set but never used

"../calc.c", line 746: warning #552-D: variable "amp3" was set but never used

"../calc.c", line 892: warning #179-D: variable "rcs_temp2" was declared but never referenced

"../calc.c", line 1004: warning #179-D: variable "x" was declared but never referenced

"../calc.c", line 1004: warning #179-D: variable "y" was declared but never referenced

"../calc.c", line 1006: warning #179-D: variable "amp1" was declared but never referenced

"../calc.c", line 1006: warning #179-D: variable "amp2" was declared but never referenced

"../calc.c", line 1007: warning #179-D: variable "delta_amp" was declared but never referenced

"../calc.c", line 1156: warning #179-D: variable "angle4_0" was declared but never referenced

"../calc.c", line 1156: warning #179-D: variable "angle4_1" was declared but never referenced

"../calc.c", line 1156: warning #179-D: variable "angle4_diff" was declared but never referenced

"../calc.c", line 1286: warning #179-D: variable "i" was declared but never referenced

"../calc.c", line 1286: warning #179-D: variable "k" was declared but never referenced

"../calc.c", line 1287: warning #179-D: variable "temp1" was declared but never referenced

"../calc.c", line 1287: warning #179-D: variable "temp2" was declared but never referenced

"../calc.c", line 1287: warning #179-D: variable "temp3" was declared but never referenced

"../calc.c", line 1303: warning #179-D: variable "temp1" was declared but never referenced

"../calc.c", line 1303: warning #179-D: variable "temp2" was declared but never referenced

"../calc.c", line 1322: warning #552-D: variable "CarSpeed" was set but never used

"../calc.c", line 1323: warning #179-D: variable "deltaDop1" was declared but never referenced

"../calc.c", line 1323: warning #179-D: variable "deltaDop2" was declared but never referenced

"../calc.c", line 1326: warning #179-D: variable "cos_angle_t" was declared but never referenced

"../calc.c", line 1327: warning #179-D: variable "ThresholdYSpeed" was declared but never referenced

"../calc.c", line 1719: warning #179-D: variable "angle0" was declared but never referenced

"../calc.c", line 1719: warning #179-D: variable "angle1" was declared but never referenced

"../calc.c", line 1719: warning #179-D: variable "angle" was declared but never referenced

"../calc.c", line 1719: warning #179-D: variable "temp" was declared but never referenced

"../calc.c", line 1720: warning #179-D: variable "angle4_0" was declared but never referenced

"../calc.c", line 1720: warning #179-D: variable "angle4_1" was declared but never referenced

"../calc.c", line 1720: warning #179-D: variable "angle4_diff" was declared but never referenced

"../calc.c", line 1720: warning #179-D: variable "angledif" was declared but never referenced

"../calc.c", line 1721: warning #179-D: variable "i" was declared but never referenced

"../calc.c", line 1721: warning #179-D: variable "flag" was declared but never referenced

"../calc.c", line 1768: warning #188-D: pointless comparison of unsigned integer with zero

"../calc.c", line 381 (col. 50): remark #2614-D: Use –fp_mode=relaxed to enable TMU hardware support for FP division.

"../calc.c", line 381 (col. 21): remark #2614-D: Use –fp_mode=relaxed to enable TMU hardware support for cos.

"../calc.c", line 1135 (col. 18): remark #2614-D: Use –fp_mode=relaxed to enable TMU hardware support for sin.

"../calc.c", line 1170 (col. 18): remark #2614-D: Use –fp_mode=relaxed to enable TMU hardware support for atan2.

'Finished building: ../calc.c'

' '

'Building file: ../data_pro.c'

'Invoking: C2000 Compiler'

"../data_pro.c", line 108: warning #64-D: shift count is too large

"../data_pro.c", line 109: warning #64-D: shift count is too large

"../data_pro.c", line 155: warning #64-D: shift count is too large

"../data_pro.c", line 156: warning #64-D: shift count is too large

"../data_pro.c", line 312: warning #179-D: variable "i" was declared but never referenced

'Finished building: ../data_pro.c'

' '

'Building file: ../track_pro.c'

'Invoking: C2000 Compiler'

"../track_pro.c", line 7: warning #994-D: missing return statement at end of non-void function "Track_compare"

'Finished building: ../track_pro.c'

' '

'Building file: ../user/FreCalib.c'

'Invoking: C2000 Compiler'

"../user/FreCalib.c", line 184 (col. 32): remark #2614-D: Use –fp_mode=relaxed to enable TMU hardware support for FP division.

'Finished building: ../user/FreCalib.c'

' '

'Building file: ../user/fpufft.c'

'Invoking: C2000 Compiler'

'Finished building: ../user/fpufft.c'

' '

'Building file: ../user/timer.c'

'Invoking: C2000 Compiler'

'Finished building: ../user/timer.c'

' '

'Building file: ../src/DCSM_Z1_ZoneSelectBlock.asm'

'Invoking: C2000 Compiler'

'Finished building: ../src/DCSM_Z1_ZoneSelectBlock.asm'

' '

'Building file: ../src/F2837xS_Adc.c'

'Invoking: C2000 Compiler'

'Finished building: ../src/F2837xS_Adc.c'

' '

'Building file: ../src/F2837xS_CodeStartBranch.asm'

'Invoking: C2000 Compiler'

'Finished building: ../src/F2837xS_CodeStartBranch.asm'

' '

'Building file: ../src/F2837xS_CpuTimers.c'

'Invoking: C2000 Compiler'

'Finished building: ../src/F2837xS_CpuTimers.c'

' '

'Building file: ../src/F2837xS_DefaultISR.c'

'Invoking: C2000 Compiler'

'Finished building: ../src/F2837xS_DefaultISR.c'

' '

'Building file: ../src/F2837xS_Dma.c'

'Invoking: C2000 Compiler'

'Finished building: ../src/F2837xS_Dma.c'

' '

'Building file: ../src/F2837xS_ECap.c'

'Invoking: C2000 Compiler'

'Finished building: ../src/F2837xS_ECap.c'

' '

'Building file: ../src/F2837xS_EPwm.c'

'Invoking: C2000 Compiler'

'Finished building: ../src/F2837xS_EPwm.c'

' '

'Building file: ../src/F2837xS_Emif.c'

'Invoking: C2000 Compiler'

'Finished building: ../src/F2837xS_Emif.c'

' '

'Building file: ../src/F2837xS_GlobalVariableDefs.c'

'Invoking: C2000 Compiler'

'Finished building: ../src/F2837xS_GlobalVariableDefs.c'

' '

'Building file: ../src/F2837xS_Gpio.c'

'Invoking: C2000 Compiler'

'Finished building: ../src/F2837xS_Gpio.c'

' '

'Building file: ../src/F2837xS_PieCtrl.c'

'Invoking: C2000 Compiler'

'Finished building: ../src/F2837xS_PieCtrl.c'

' '

'Building file: ../src/F2837xS_PieVect.c'

'Invoking: C2000 Compiler'

'Finished building: ../src/F2837xS_PieVect.c'

' '

'Building file: ../src/F2837xS_SysCtrl.c'

'Invoking: C2000 Compiler'

'Finished building: ../src/F2837xS_SysCtrl.c'

' '

'Building file: ../src/F2837xS_usDelay.asm'

'Invoking: C2000 Compiler'

'Finished building: ../src/F2837xS_usDelay.asm'

' '

'Building file: ../drv/WatchDog.c'

'Invoking: C2000 Compiler'

'Finished building: ../drv/WatchDog.c'

' '

'Building file: ../drv/interrupt.c'

'Invoking: C2000 Compiler'

'Finished building: ../drv/interrupt.c'

' '

'Building file: ../drv/sysctl.c'

'Invoking: C2000 Compiler'

'Finished building: ../drv/sysctl.c'

' '

'Building file: ../drv/systick.c'

'Invoking: C2000 Compiler'

'Finished building: ../drv/systick.c'

' '

'Building file: ../drv/uart.c'

'Invoking: C2000 Compiler'

'Finished building: ../drv/uart.c'

' '

'Building file: ../drv/uartstdio.c'

'Invoking: C2000 Compiler'

'Finished building: ../drv/uartstdio.c'

' '

'Building file: ../drv/usb.c'

'Invoking: C2000 Compiler'

'Finished building: ../drv/usb.c'

' '

'Building file: ../drv/usb_bulk_structs.c'

'Invoking: C2000 Compiler'

'Finished building: ../drv/usb_bulk_structs.c'

' '

'Building file: ../drv/usb_hal.c'

'Invoking: C2000 Compiler'

"../drv/usb_hal.c", line 86 (col. 5): remark #2614-D: Use –fp_mode=relaxed to enable TMU hardware support for FP division.

'Finished building: ../drv/usb_hal.c'

' '

'Building file: ../drv/usbbuffer.c'

'Invoking: C2000 Compiler'

'Finished building: ../drv/usbbuffer.c'

' '

'Building file: ../drv/usbdbulk.c'

'Invoking: C2000 Compiler'

'Finished building: ../drv/usbdbulk.c'

' '

'Building file: ../drv/usbdcdc.c'

'Invoking: C2000 Compiler'

'Finished building: ../drv/usbdcdc.c'

' '

'Building file: ../drv/usbdcomp.c'

'Invoking: C2000 Compiler'

'Finished building: ../drv/usbdcomp.c'

' '

'Building file: ../drv/usbdconfig.c'

'Invoking: C2000 Compiler'

'Finished building: ../drv/usbdconfig.c'

' '

'Building file: ../drv/usbkeyboardmap.c'

'Invoking: C2000 Compiler'

'Finished building: ../drv/usbkeyboardmap.c'

' '

'Building file: ../drv/usbmode.c'

'Invoking: C2000 Compiler'

'Finished building: ../drv/usbmode.c'

' '

'Building file: ../FLASH/Flash2837xs_CsmKeys.asm'

'Invoking: C2000 Compiler'

'Finished building: ../FLASH/Flash2837xs_CsmKeys.asm'

' '

'Building file: ../FLASH/FlashProg.c'

'Invoking: C2000 Compiler'

"E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/F2837xS_common/include/F2837xS_Examples.h", line 283: warning #48-D: incompatible redefinition of macro "CPU_RATE" (declared at line 56 of "E:\1_SHANGFUDIAN\SHANGFUDIAN_EMC_DEMO\20181129Code_IC421_M\AppProject\Project\FLASH\Flash2837xS_API_Config.h")

"E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/Project/CAN/PE_Types.h", line 46: warning #303-D: typedef name has already been declared (with same type)

"E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/Project/CAN/PE_Types.h", line 54: warning #303-D: typedef name has already been declared (with same type)

"E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/Project/FLASH/FlashProg.h", line 126: warning #48-D: incompatible redefinition of macro "EALLOW" (declared at line 39 of "E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/F2837xS_headers/include/F2837xS_device.h")

"E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/Project/FLASH/FlashProg.h", line 127: warning #48-D: incompatible redefinition of macro "EDIS" (declared at line 42 of "E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/F2837xS_headers/include/F2837xS_device.h")

"E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/Project/FLASH/FlashProg.h", line 128: warning #48-D: incompatible redefinition of macro "DINT" (declared at line 35 of "E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/F2837xS_headers/include/F2837xS_device.h")

"../FLASH/FlashProg.c", line 1019: warning #225-D: function "SerialPrintf" declared implicitly

"../FLASH/FlashProg.c", line 1063: warning #225-D: function "SerialPrintf" declared implicitly

'Finished building: ../FLASH/FlashProg.c'

' '

'Building file: ../FLASH/IEE1.c'

'Invoking: C2000 Compiler'

"..\FLASH\Flash2837xS_API_Config.h", line 56: warning #48-D: incompatible redefinition of macro "CPU_RATE" (declared at line 283 of "E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/F2837xS_common/include/F2837xS_Examples.h")

"E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/Project/CAN/PE_Types.h", line 46: warning #303-D: typedef name has already been declared (with same type)

"E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/Project/CAN/PE_Types.h", line 54: warning #303-D: typedef name has already been declared (with same type)

"..\FLASH\FlashProg.h", line 28: warning #303-D: typedef name has already been declared (with same type)

"..\FLASH\FlashProg.h", line 126: warning #48-D: incompatible redefinition of macro "EALLOW" (declared at line 39 of "E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/F2837xS_headers/include/F2837xS_device.h")

"..\FLASH\FlashProg.h", line 127: warning #48-D: incompatible redefinition of macro "EDIS" (declared at line 42 of "E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/F2837xS_headers/include/F2837xS_device.h")

"..\FLASH\FlashProg.h", line 128: warning #48-D: incompatible redefinition of macro "DINT" (declared at line 35 of "E:/1_SHANGFUDIAN/SHANGFUDIAN_EMC_DEMO/20181129Code_IC421_M/AppProject/F2837xS_headers/include/F2837xS_device.h")

"../FLASH/IEE1.c", line 112: warning #552-D: variable "temp" was set but never used

"../FLASH/IEE1.c", line 129: warning #179-D: variable "i" was declared but never referenced

'Finished building: ../FLASH/IEE1.c'

' '

'Building file: ../FLASH/IEE1Ctrl.c'

'Invoking: C2000 Compiler'

"C:/ti/ccsv6/tools/compiler/ti-cgt-c2000_6.4.2/include/stdint.h", line 50: warning #303-D: typedef name has already been declared (with same type)

"C:/ti/ccsv6/tools/compiler/ti-cgt-c2000_6.4.2/include/stdint.h", line 51: warning #303-D: typedef name has already been declared (with same type)

"../FLASH/IEE1Ctrl.c", line 89: warning #225-D: function "SoftReset" declared implicitly

'Finished building: ../FLASH/IEE1Ctrl.c'

' '

'Building file: ../CAN/AppProt.c'

'Invoking: C2000 Compiler'

"../CAN/AppProt.c", line 622: warning #112-D: statement is unreachable

"../CAN/AppProt.c", line 773: warning #112-D: statement is unreachable

"../CAN/AppProt.c", line 972: warning #112-D: statement is unreachable

"../CAN/AppProt.c", line 1153: warning #112-D: statement is unreachable

"../CAN/AppProt.c", line 1180: warning #112-D: statement is unreachable

"../CAN/AppProt.c", line 1326: warning #112-D: statement is unreachable

"../CAN/AppProt.c", line 1355: warning #112-D: statement is unreachable

'Finished building: ../CAN/AppProt.c'

' '

'Building file: ../CAN/CanDecode.c'

'Invoking: C2000 Compiler'

'Finished building: ../CAN/CanDecode.c'

' '

'Building file: ../CAN/CfgMgr.c'

'Invoking: C2000 Compiler'

'Finished building: ../CAN/CfgMgr.c'

' '

'Building file: ../CAN/DTCMgr.c'

'Invoking: C2000 Compiler'

"../CAN/DTCMgr.c", line 774: warning #188-D: pointless comparison of unsigned integer with zero

'Finished building: ../CAN/DTCMgr.c'

' '

'Building file: ../CAN/IEE1.c'

'Invoking: C2000 Compiler'

'Finished building: ../CAN/IEE1.c'

' '

'Building file: ../CAN/LinkMsg.c'

'Invoking: C2000 Compiler'

'Finished building: ../CAN/LinkMsg.c'

' '

'Building file: ../CAN/Link_can.c'

'Invoking: C2000 Compiler'

"..\CAN\PE_Types.h", line 46: warning #303-D: typedef name has already been declared (with same type)

"..\CAN\PE_Types.h", line 54: warning #303-D: typedef name has already been declared (with same type)

"../CAN/Link_can.c", line 120: warning #179-D: variable "cTemp" was declared but never referenced

"../CAN/Link_can.c", line 121: warning #179-D: variable "CalibAngularXY" was declared but never referenced

"../CAN/Link_can.c", line 369: warning #179-D: variable "ErrRxCount" was declared but never referenced

"../CAN/Link_can.c", line 370: warning #179-D: variable "ErrTxCount" was declared but never referenced

"../CAN/Link_can.c", line 449: warning #179-D: variable "ErrRxCount" was declared but never referenced

"../CAN/Link_can.c", line 450: warning #179-D: variable "ErrTxCount" was declared but never referenced

"../CAN/Link_can.c", line 979: warning #225-D: function "HU_0x3A7MsgDeal" declared implicitly

'Finished building: ../CAN/Link_can.c'

' '

'Building file: ../CAN/NetProt.c'

'Invoking: C2000 Compiler'

'Finished building: ../CAN/NetProt.c'

' '

'Building file: ../CAN/Prottimeout.c'

'Invoking: C2000 Compiler'

'Finished building: ../CAN/Prottimeout.c'

' '

'Building file: ../CAN/Reset.c'

'Invoking: C2000 Compiler'

'Finished building: ../CAN/Reset.c'

' '

'Building file: ../CAN/SecurityAlgorithm.c'

'Invoking: C2000 Compiler'

'Finished building: ../CAN/SecurityAlgorithm.c'

' '

'Building file: ../CAN/can.c'

'Invoking: C2000 Compiler'

'Finished building: ../CAN/can.c'

' '

'Building file: ../CAN/candriver.c'

'Invoking: C2000 Compiler'

'Finished building: ../CAN/candriver.c'

' '

'Building file: ../CAN/power.c'

'Invoking: C2000 Compiler'

'Finished building: ../CAN/power.c'

' '

'Building target: IC42_Master.out'

'Invoking: C2000 Linker'

"C:/ti/ccsv6/tools/compiler/ti-cgt-c2000_6.4.2/bin/cl2000" -v28 -ml -mt –float_support=fpu32 –tmu_support=tmu0 –advice:performance=all -g –diag_warning=225 –display_error_number –diag_wrap=off -z -m"IC42_Master.map" –stack_size=0x200 –warn_sections -i"C:/ti/ccsv6/tools/compiler/ti-cgt-c2000_6.4.2/lib" -i"C:/ti/ccsv6/tools/compiler/ti-cgt-c2000_6.4.2/include" –reread_libs –priority –disable_auto_rts –display_error_number –diag_wrap=off –xml_link_info="IC421_Master_linkInfo.xml" –rom_model -o "IC42_Master.out" "./KalmanFilter.obj" "./RadarSdk.obj" "./calc.obj" "./data_pro.obj" "./track_pro.obj" "./user/FreCalib.obj" "./user/fpufft.obj" "./user/timer.obj" "./src/DCSM_Z1_ZoneSelectBlock.obj" "./src/F2837xS_Adc.obj" "./src/F2837xS_CodeStartBranch.obj" "./src/F2837xS_CpuTimers.obj" "./src/F2837xS_DefaultISR.obj" "./src/F2837xS_Dma.obj" "./src/F2837xS_ECap.obj" "./src/F2837xS_EPwm.obj" "./src/F2837xS_Emif.obj" "./src/F2837xS_GlobalVariableDefs.obj" "./src/F2837xS_Gpio.obj" "./src/F2837xS_PieCtrl.obj" "./src/F2837xS_PieVect.obj" "./src/F2837xS_SysCtrl.obj" "./src/F2837xS_usDelay.obj" "./drv/WatchDog.obj" "./drv/interrupt.obj" "./drv/sysctl.obj" "./drv/systick.obj" "./drv/uart.obj" "./drv/uartstdio.obj" "./drv/usb.obj" "./drv/usb_bulk_structs.obj" "./drv/usb_hal.obj" "./drv/usbbuffer.obj" "./drv/usbdbulk.obj" "./drv/usbdcdc.obj" "./drv/usbdcomp.obj" "./drv/usbdconfig.obj" "./drv/usbkeyboardmap.obj" "./drv/usbmode.obj" "./FLASH/Flash2837xs_CsmKeys.obj" "./FLASH/FlashProg.obj" "./FLASH/IEE1.obj" "./FLASH/IEE1Ctrl.obj" "./CAN/AppProt.obj" "./CAN/CanDecode.obj" "./CAN/CfgMgr.obj" "./CAN/DTCMgr.obj" "./CAN/IEE1.obj" "./CAN/LinkMsg.obj" "./CAN/Link_can.obj" "./CAN/NetProt.obj" "./CAN/Prottimeout.obj" "./CAN/Reset.obj" "./CAN/SecurityAlgorithm.obj" "./CAN/can.obj" "./CAN/candriver.obj" "./CAN/power.obj" "../28377S_FLASH_lnk.cmd" "../F2837xS_Headers_nonBIOS.cmd" "../lib/C28x_FPU_Lib.lib" "../lib/usblib.lib" -l"C:/ti/ccsv6" -l"D:\CCS6.1\ccsv6\tools\compiler\ti-cgt-c2000_6.4.2\lib\libc.a" -l"D:\CCS6.1\ccsv6\tools\compiler\ti-cgt-c2000_6.4.2\lib\rts2800_ml.lib"

fatal error #6001: cannot open file "C:/ti/ccsv6": Permission denied

>> Compilation failure

gmake: *** [IC42_Master.out] Error 1

gmake: Target `all' not remade because of errors.

**** Build Finished ****

Description Resource Path Location Type
#6001 cannot open file "D:/CCS6.1/ccsv6": Permission denied IC421_Master C/C++ Problem，请问怎么解决呢

ZHG：

回复 Susan Yang:

首先谢谢您的回答，我按照您给的方法，并没能解决问题，不知道该如何解决呢

Description Resource Path Location Type
#6001 cannot open file "D:/CCS6.1/ccsv6": Permission denied IC421_Master C/C++ Problem，请问怎么解决呢

Susan Yang：

回复 ZHG:

请问您现在CCS是装在C盘还是D盘？您的CCS workspace是在哪个路径下的？您导入的程序是在E盘？

我对您的路径有点疑惑

Description Resource Path Location Type
#6001 cannot open file "D:/CCS6.1/ccsv6": Permission denied IC421_Master C/C++ Problem，请问怎么解决呢

ZHG：

回复 Susan Yang:

CCS在c盘，ccs workspace在E盘，程序在E盘，在workspace里

Description Resource Path Location Type
#6001 cannot open file "D:/CCS6.1/ccsv6": Permission denied IC421_Master C/C++ Problem，请问怎么解决呢

ZHG：

回复 ZHG:

CCS安装路径和workspace会有影响吗

CCS6.1工程编译不通过：fatal error #6001: cannot open file "D:/CCS6.1/ccsv6": Permission denied

相关推荐

热门标签

热门文章

QQ咨询

回顶部