CC2640R2F: CCS中无法使用全局静态变量？

比如 定义static bool ImageCalibrated = false;

、、、

if(ImageCalibrated  == false){

   ImageCalibrated   = true;

   do something;

}

、、、

很简单的依据，但是根部不会执行花括号内的程序，如果把定义变量的static去掉，就能正常执行了。

这是CCS自身的问题还是编译器版本的问题？我用的版本如下：

Kevin Qiu1：

变量和调用是否在同一文件中，和编译器和CCS都没关系，你可以看到在例程pininterrupt中调用没有问题

/**======== pinInterrupt.c ========*/
#include <unistd.h>/* Driver Header files */
#include <ti/drivers/PIN.h>/* Example/Board Header files */
#include "Board.h"/* Pin driver handles */
static PIN_Handle buttonPinHandle;
static PIN_Handle ledPinHandle;/* Global memory storage for a PIN_Config table */
static PIN_State buttonPinState;
static PIN_State ledPinState;/** Initial LED pin configuration table*- LEDs Board_PIN_LED0 is on.*- LEDs Board_PIN_LED1 is off.*/
PIN_Config ledPinTable[] = {Board_PIN_LED0 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_HIGH | PIN_PUSHPULL | PIN_DRVSTR_MAX,Board_PIN_LED1 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW| PIN_PUSHPULL | PIN_DRVSTR_MAX,PIN_TERMINATE
};/** Application button pin configuration table:*- Buttons interrupts are configured to trigger on falling edge.*/
PIN_Config buttonPinTable[] = {Board_PIN_BUTTON0| PIN_INPUT_EN | PIN_PULLUP | PIN_IRQ_NEGEDGE,Board_PIN_BUTTON1| PIN_INPUT_EN | PIN_PULLUP | PIN_IRQ_NEGEDGE,PIN_TERMINATE
};/**======== buttonCallbackFxn ========*Pin interrupt Callback function board buttons configured in the pinTable.*If Board_PIN_LED3 and Board_PIN_LED4 are defined, then we'll add them to the PIN*callback function.*/
void buttonCallbackFxn(PIN_Handle handle, PIN_Id pinId) {uint32_t currVal = 0;/* Debounce logic, only toggle if the button is still pushed (low) */CPUdelay(8000*50);if (!PIN_getInputValue(pinId)) {/* Toggle LED based on the button pressed */switch (pinId) {case Board_PIN_BUTTON0:currVal =PIN_getOutputValue(Board_PIN_LED0);PIN_setOutputValue(ledPinHandle, Board_PIN_LED0, !currVal);break;case Board_PIN_BUTTON1:currVal =PIN_getOutputValue(Board_PIN_LED1);PIN_setOutputValue(ledPinHandle, Board_PIN_LED1, !currVal);break;default:/* Do nothing */break;}}
}/**======== mainThread ========*/
void *mainThread(void *arg0)
{/* Open LED pins */ledPinHandle = PIN_open(&ledPinState, ledPinTable);if(!ledPinHandle) {/* Error initializing board LED pins */while(1);}buttonPinHandle = PIN_open(&buttonPinState, buttonPinTable);if(!buttonPinHandle) {/* Error initializing button pins */while(1);}/* Setup callback for button pins */if (PIN_registerIntCb(buttonPinHandle, &buttonCallbackFxn) != 0) {/* Error registering button callback function */while(1);}/* Loop forever */while(1) {sleep(1000);}
}

,

风吹我衣：

就是在同一文件，测试了很多次，都是这样

,

Kevin Qiu1：

我试了没有问题，你用上面的例程试一下