CCS无法顺利下载程序,但是RF_flash_programmer可以识别板子并下载或擦除程序,但是程序不运行。是否说明板子硬件无问题。
CC2640R2F程序移植从7*7封装到4*4后,程序无法下载。CCS 下载到最后一点跳转在线debug时出错,报错如下
Cortex_M3_0: GEL Output: Memory Map Initialization Complete.
Cortex_M3_0: GEL Output: Board Reset Complete.
Cortex_M3_0: Can't Run Target CPU: (Error -2134 @ 0x0) Unable to control device execution state. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 7.0.48.0)Cortex_M3_0: JTAG Communication Error: (Error -1170 @ 0x0) Unable to access the DAP. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 7.0.48.0)
user6448386:
根据console的输出,
Cortex_M3_0: GEL Output: Memory Map Initialization Complete.
Cortex_M3_0: GEL Output: Board Reset Complete.
CCS是可以初步部分操作板子的
Kevin Qiu1:
回复 user6448386:
看下C:/ti/simplelink_cc2640r2_sdk_4_10_00_10/docs/blestack/ble_user_guide/html/ble-stack-3.x/custom-hardware.html
调试错误对照这里排查software-dl.ti.com/…/ccsv7_debugging_jtag_connectivity_issues.html
user6448386:
回复 Kevin Qiu1:
这里没说有错误啊。只是教你一步步怎么做
您的意思是硬件没问题对吗?
Kevin Qiu1:
回复 user6448386:
flash programmer可以下载正常程序硬件出问题的几率不大,
CCS版本是多少