TI中文支持网Hi my project is used BQ25619RTWR,How to get the charging current up to 1.5A,My current Settings look like this:
REG00,0X12
REG01,0X12
REG02,0XB8
REG03,0X60
REG04,0X40
REG05,0X8E
REG06,0X26
It was found that the charging current was 1.3A,but if I changed REG02 to 0XBF,The current is going to be 100mA.
Star Xu：
您好，正在查询，稍后回复
,
Star Xu：
您好，当电流为100 mA时，请提供寄存器0x07至0x0C的值。 另外请提供VBUS，VBAT，SW和ICHG的波形。
