TI中文支持网我使用的是TMS320F28035芯片，在烧录程序的时候经常会出现low-power mode的错误提示，无法烧录。经检测dsp供电正常，仿真器也没有问题。还有可能是什么问题.
错误提示如下：
Trouble Reading FP Register:
(Error -1156 @ 0x1)
Device may be operating in low-power mode. Do you want to bring it out of this mode?
(Emulation package 5.0.681.0)
console:
C28xx: Flash Programmer: Warning: The configured device (TMS320F28035), does not match the detected device (). Flash Programming operations could be affected. Please consider modifying your target configuration file.
C28xx: Trouble Reading FP Register: (Error -1156 @ 0x1) Device may be operating in low-power mode. Do you want to bring it out of this mode? (Emulation package 5.0.681.0)
C28xx: GEL Output:
Device Calibration not complete, check if device is unlocked and recalibrate.C28xx: Flash Programmer: Error erasing Flash memory.
C28xx: Flash operation timed out waiting for the algorithm to complete. Operation cancelled.
C28xx: Flash operation timed out waiting for the algorithm to complete. Operation cancelled.
C28xx: Flash operation timed out waiting for the algorithm to complete. Operation cancelled.
C28xx: Warning: Target was left running after a reset during a Flash operation.
C28xx: Warning: Target was left running after a reset during a Flash operation.
C28xx: Flash operation timed out waiting for the algorithm to complete. Operation cancelled.
C28xx: Flash operation timed out waiting for the algorithm to complete. Operation cancelled.
C28xx: Flash operation timed out waiting for the algorithm to complete. Operation cancelled.
C28xx: Flash operation timed out waiting for the algorithm to complete. Operation cancelled.
C28xx: GEL Output:
Device Calibration not complete, check if device is unlocked and recalibrate.
请各位帮忙，给些建议或资料都可以
mangui zhang：
检查 Target Configuration 是否设置正确。检查 JTAG 是否连接正确（ 尤其是 TRSTN 引脚 ）。
cunyu yi：
回复 mangui zhang:
我新做了个dsp的板子，但是用仿真器能在ram里仿真，不能在flash里仿真，检查电源没问题，jtag应该也没问题的，提示这个28xx: Trouble Reading FP Register: (Error 1156 @ 0x1) Device may be operatingin low-power mode. Do you want to bring it out of this mode?
Martin Yu：
回复 cunyu yi:
cunyu,
建议检查下硬件电路，芯片周边的滤波电容、1.8V对地的电容、电感的值检查下，应该是供电能力引起的。
cunyu yi：
回复 Martin Yu:
检查了晶振，是晶振的问题，现在可以仿真，但是现在在ram里仿真的时候在外部SRAM写一个数据的时候查看该地址的数据会报错
Trouble Reading Register PC:(Error -1156 @ 0x0)Device may be operating in low-power mode. Do you want to bring it out of this mode?(Emulation package 5.1.232.0)
cunyu yi：
回复 Martin Yu:
地方
shengxiang wu：
回复 cunyu yi:
兄弟 碰到同样问题了，看到回复可以 回复我一下怎么解决的吗？谢谢
Jason Wu4：
回复 shengxiang wu:
如下帖子跟您同样问题，可做相关参考
https://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/438717
user6432532：
回复 shengxiang wu:
检查一下晶振是否起振
