TI中文支持网你好，
测试环境：
测试板：iwr6843ODS + ICBOOST
软件版本：mmwave_industrial_toolbox_4_4_1
下载到ods的固件：overhead_3d_people_count_demo.bin
pc端调试软件：overhead_demo_visualizer.exe
我按照开发指南连接并刷机成功后，打开pc调式软件，选好串口及cfg文件并勾选load config，当我点击Done按键后产生如下报错信息。
请问我该如何解决这个问题？
谢谢。
报错信息附录：
Opening configuration file C:\ti\mmwave_industrial_toolbox_4_4_1\labs\people_counting\overhead_3d_people_counting\gui\pc_6843_3d_ods_overhead_3m_radial.cfg …
Sending configuration from C:\ti\mmwave_industrial_toolbox_4_4_1\labs\people_counting\overhead_3d_people_counting\gui\pc_6843_3d_ods_overhead_3m_radial.cfg file to IWR16xx …
sensorStop
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
flushCfg
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
dfeDataOutputMode 1
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
channelCfg 15 7 0
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
adcCfg 2 1
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
adcbufCfg -1 0 1 1 1
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
lowPower 0 0
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
profileCfg 0 61.2 60.00 17.00 50 657930 0 55.27 1 64 2000.00 2 1 36
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
chirpCfg 0 0 0 0 0 0 0 1
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
chirpCfg 1 1 0 0 0 0 0 2
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
chirpCfg 2 2 0 0 0 0 0 4
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
frameCfg 0 2 224 0 120.00 1 0
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
dynamicRACfarCfg -1 10 1 1 1 8 8 6 4 4.00 6.00 0.50 1 1
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
staticRACfarCfg -1 4 4 2 2 8 16 4 6 6.00 13.00 0.50 0 0
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
dynamicRangeAngleCfg -1 7.000 0.0010 2 0
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
dynamic2DAngleCfg -1 5 1 1 1.00 15.00 2
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
staticRangeAngleCfg -1 0 1 1
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
classifierCfg 1 1 1 500 0.6 1.0 0.95 10
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
antGeometry0 0 0 -1 -1 -2 -2 -3 -3 -2 -2 -3 -3
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
antGeometry1 0 -1 -1 0 0 -1 -1 0 -2 -3 -3 -2
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
antPhaseRot 1 -1 -1 1 1 -1 -1 1 1 -1 -1 1
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
fovCfg -1 60.0 60.0
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
compRangeBiasAndRxChanPhase 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
staticBoundaryBox -3 3 -3 3 -0.5 3
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
boundaryBox -4 4 -4 4 -0.5 3
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
sensorPosition 2.9 0 90
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
gatingParam 2 2 2 2 4
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
stateParam 3 3 6 300 5 1000
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
allocationParam 5 100 0.01 10 1.5 20
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
maxAcceleration 0.2 0.01 0.2
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
trackingCfg 1 2 800 20 37 33 120
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
sensorStart
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: A timeout occurred before the Terminator was reached.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
警告: The specified amount of data was not returned within the Timeout period.
'serial' unable to read any data. For more information on possible reasons, see <a href="matlab: helpview(fullfile(docroot,'instrument','instrument.map'), 'serial_nodata')">Serial Read Warnings</a>.
——————
Chris Meng：
你好，
错误提示应该是由于毫米波板子没有正确相应产生的。
1. 请问确认你使用的IWR6843ISK-ODS上IWR6843是ES2.0的芯片么？不同版本的区别，请参考芯片errata里的芯片上丝印的介绍。
2. 请MMWAVEICBOOST上的SOP在运行demo的时候是001么？
Yanrong Lux：
回复 Chris Meng:
你好，
我确认了下，我板子上序列尾号是“678A”是ES2.0的。sop是 001.
谢谢。
Yanrong Lux：
回复 Chris Meng:
你好，
是这两个口的问题，是gui自动填充，data和cfg口填反了。感谢。
