TI中文支持网
TI专业的中文技术问题搜集分享网站

BQ76952EVM板I2C通信问题

Demo板启动后,示波器能从I2C通信上一直检测到0x16和0xAA两帧独立的通信,请问有什么用?

Demo板的通信里面第一帧数据使用的是0x10 、0x3E、0x02、0x83、0x00  0x00,这帧数据的意思是什么?

Star Xu:

正在查询,稍后回复

Star Xu:

回复 Star Xu:

您参考下面的答复:
The BQ76925 has a base 7 bit address of 0x20, see table 4 of the data sheet.The byte addresses are combined with the device address, so for a write the 8 bit address space would be 0x40 to 0x7E (even only for write).

Remember that the BQ76925 does not have an ADC, it is analog output.On the EVM the MSP430 converts the values from the BQ76925 and transfers them to the PC for display.The mechanism of the control and transfer of the MSP430 are not described, but basically the MSP430 has an I2C register space which is read by the PC.It is not documented in the BQ76925 EVM user guide how the control is provided, or the data assignments.

So any read or write to an address outside the BQ76925 space would be to the MSP430, those values are not documented.

赞(0)
未经允许不得转载:TI中文支持网 » BQ76952EVM板I2C通信问题
分享到: 更多 (0)