TI中文支持网各位：
我用了自己设计的PGA970板，XDS200仿真器 CCS7.0。连接的时候总是报错 后来在自己的电脑上不知道怎么折腾好了 可以连接 就是成功率比较低 总是报错 让我降低通讯速率。
换任何一台其他电脑都无法连接成功
一直在报错‘-183’
请问有人遇到过类似问题吗？？
—–[Print the reset-command software log-file]—————————–
This utility has selected a 560/2xx-class product.
This utility will load the program 'xds2xxu.out'.
The library build date was 'Feb 13 2017'.
The library build time was '15:28:48'.
The library package version is '6.0.576.0'.
The library component version is '35.35.0.0'.
The controller does not use a programmable FPGA.
This utility will load the program 'xds2xxu.out'.
The library build date was 'Feb 13 2017'.
The library build time was '15:28:48'.
The library package version is '6.0.576.0'.
The library component version is '35.35.0.0'.
The controller does not use a programmable FPGA.
An error occurred while hard opening the controller.
—–[An error has occurred and this utility has aborted]——————–
This error is generated by TI's USCIF driver or utilities.
The value is '-183' (0xffffff49).
The title is 'SC_ERR_CTL_CBL_BREAK_FAR'.
The title is 'SC_ERR_CTL_CBL_BREAK_FAR'.
The explanation is:
The controller has detected a cable break far-from itself.
The user must connect the cable/pod to the target.
The controller has detected a cable break far-from itself.
The user must connect the cable/pod to the target.
[End: Texas Instruments XDS2xx USB Debug Probe]
Amy Luo：
您好，
在尝试连接xds200之前，PGA970是否自行通电？请先确保PGA970板电源已接通。
le li1：
回复 Amy Luo:
您好！
电源已经连接，用一台电脑偶尔可以连接成功，偶尔提示降低通讯速度。此时，将该XDS200连入另一台装好CCS7的电脑，就提示-183这种错误了。我试装了很多台电脑，都是这种错误，只在第一台安装的电脑上连接成功过。
