TI中文支持网BQ3060的PRES脚位已经接地，EV2300软件上PRES显示1状态，如何在软件上直接设置PRES为0
Star Xu：
你把PRES接地的断开试一下，这个是硬件连接决定的，软件应该设置不了
PRES is sampled once per second and if PRES is high, the Operation Status [PRES] flag is cleared. If PRES is low, the Operation Status [PRES] flag is set indicating the system is present (the battery is inserted).
