TI中文支持网设备名称：高电压电机控制和PFC开发者套件
控制卡：F28335 controlCARD RELEASE 2.2
CCS版本：4.2
问题描述：在实验过程中，由于未加看门狗程序，一次运行程序跑飞后再也无法通过CCS与F28335连接，转而提示如下信息：
Failed Software Reset:
Error 0x00000024/-1137
Error during: Register, Execution,It appears that the target is being held in reset. This may be
due to Wait-In-Reset (WIR) configuration set by the EMU 0/1 pin
settings. If this is the case, press Cancel and disconnect all
connected devices to attempt to clear the WIR configuration.
If this is a multi-core system, the master CPU or ICEPick may
not be releasing the target from reset. Please check your
configuration and/or your GEL files to ensure that nothing
is blocking the target from being released from reset.
在点击“disconnect”后，过一会又会出现如下信息提示：
The GEL callback "OnTargetConnect()" for the target "Texas Instruments XDS100v2 USB Emulator_0/C28xx" is still processing.
The function could contain an infinite loop.
Do you wish to pause the processing of this function and continue?
点击“No”则会重复出现上述提示，点击“Yes”后出现如下信息：
C28xx: The GEL callback "OnTargetConnect()" is no longer running atomically.
查看原理图后，检测RESET引脚发现其上电后一直为低电平，且上电一会MCU便会非常发烫，请问如何解决这个问题，谢谢^^。
Zhishan Yu：
麻烦工作人员或懂的朋友指导一下。。
设备名称：高电压电机控制和PFC开发者套件
控制卡：F28335 controlCARD RELEASE 2.2
CCS版本：4.2
问题描述：在实验过程中，由于未加看门狗程序，一次运行程序跑飞后再也无法通过CCS与F28335连接，转而提示如下信息：
Failed Software Reset:
Error 0x00000024/-1137
Error during: Register, Execution,It appears that the target is being held in reset. This may be
due to Wait-In-Reset (WIR) configuration set by the EMU 0/1 pin
settings. If this is the case, press Cancel and disconnect all
connected devices to attempt to clear the WIR configuration.
If this is a multi-core system, the master CPU or ICEPick may
not be releasing the target from reset. Please check your
configuration and/or your GEL files to ensure that nothing
is blocking the target from being released from reset.
在点击“disconnect”后，过一会又会出现如下信息提示：
The GEL callback "OnTargetConnect()" for the target "Texas Instruments XDS100v2 USB Emulator_0/C28xx" is still processing.
The function could contain an infinite loop.
Do you wish to pause the processing of this function and continue?
点击“No”则会重复出现上述提示，点击“Yes”后出现如下信息：
C28xx: The GEL callback "OnTargetConnect()" is no longer running atomically.
查看原理图后，检测RESET引脚发现其上电后一直为低电平，且上电一会MCU便会非常发烫，请问如何解决这个问题，谢谢^^。
Zhishan Yu：
继续求助~
设备名称：高电压电机控制和PFC开发者套件
控制卡：F28335 controlCARD RELEASE 2.2
CCS版本：4.2
问题描述：在实验过程中，由于未加看门狗程序，一次运行程序跑飞后再也无法通过CCS与F28335连接，转而提示如下信息：
Failed Software Reset:
Error 0x00000024/-1137
Error during: Register, Execution,It appears that the target is being held in reset. This may be
due to Wait-In-Reset (WIR) configuration set by the EMU 0/1 pin
settings. If this is the case, press Cancel and disconnect all
connected devices to attempt to clear the WIR configuration.
If this is a multi-core system, the master CPU or ICEPick may
not be releasing the target from reset. Please check your
configuration and/or your GEL files to ensure that nothing
is blocking the target from being released from reset.
在点击“disconnect”后，过一会又会出现如下信息提示：
The GEL callback "OnTargetConnect()" for the target "Texas Instruments XDS100v2 USB Emulator_0/C28xx" is still processing.
The function could contain an infinite loop.
Do you wish to pause the processing of this function and continue?
点击“No”则会重复出现上述提示，点击“Yes”后出现如下信息：
C28xx: The GEL callback "OnTargetConnect()" is no longer running atomically.
查看原理图后，检测RESET引脚发现其上电后一直为低电平，且上电一会MCU便会非常发烫，请问如何解决这个问题，谢谢^^。
rookiecalf：
回复 Zhishan Yu:
reset引脚一直为低，你需要确认一下是外围电路影响的，还是本身芯片的问题。
设备名称：高电压电机控制和PFC开发者套件
控制卡：F28335 controlCARD RELEASE 2.2
CCS版本：4.2
问题描述：在实验过程中，由于未加看门狗程序，一次运行程序跑飞后再也无法通过CCS与F28335连接，转而提示如下信息：
Failed Software Reset:
Error 0x00000024/-1137
Error during: Register, Execution,It appears that the target is being held in reset. This may be
due to Wait-In-Reset (WIR) configuration set by the EMU 0/1 pin
settings. If this is the case, press Cancel and disconnect all
connected devices to attempt to clear the WIR configuration.
If this is a multi-core system, the master CPU or ICEPick may
not be releasing the target from reset. Please check your
configuration and/or your GEL files to ensure that nothing
is blocking the target from being released from reset.
在点击“disconnect”后，过一会又会出现如下信息提示：
The GEL callback "OnTargetConnect()" for the target "Texas Instruments XDS100v2 USB Emulator_0/C28xx" is still processing.
The function could contain an infinite loop.
Do you wish to pause the processing of this function and continue?
点击“No”则会重复出现上述提示，点击“Yes”后出现如下信息：
C28xx: The GEL callback "OnTargetConnect()" is no longer running atomically.
查看原理图后，检测RESET引脚发现其上电后一直为低电平，且上电一会MCU便会非常发烫，请问如何解决这个问题，谢谢^^。
Zhishan Yu：
回复 rookiecalf:
我用的是TI公司的开发箱和控制卡，所以外围电路是不会有问题的，而且已经提到了一直都是好用的，板子没烧没坏，就在一次疑似程序跑飞之后就成这样了
设备名称：高电压电机控制和PFC开发者套件
控制卡：F28335 controlCARD RELEASE 2.2
CCS版本：4.2
问题描述：在实验过程中，由于未加看门狗程序，一次运行程序跑飞后再也无法通过CCS与F28335连接，转而提示如下信息：
Failed Software Reset:
Error 0x00000024/-1137
Error during: Register, Execution,It appears that the target is being held in reset. This may be
due to Wait-In-Reset (WIR) configuration set by the EMU 0/1 pin
settings. If this is the case, press Cancel and disconnect all
connected devices to attempt to clear the WIR configuration.
If this is a multi-core system, the master CPU or ICEPick may
not be releasing the target from reset. Please check your
configuration and/or your GEL files to ensure that nothing
is blocking the target from being released from reset.
在点击“disconnect”后，过一会又会出现如下信息提示：
The GEL callback "OnTargetConnect()" for the target "Texas Instruments XDS100v2 USB Emulator_0/C28xx" is still processing.
The function could contain an infinite loop.
Do you wish to pause the processing of this function and continue?
点击“No”则会重复出现上述提示，点击“Yes”后出现如下信息：
C28xx: The GEL callback "OnTargetConnect()" is no longer running atomically.
查看原理图后，检测RESET引脚发现其上电后一直为低电平，且上电一会MCU便会非常发烫，请问如何解决这个问题，谢谢^^。
Martin Yu：
回复 Zhishan Yu:
Zhishan,
如你描述，是仿真器连不上了，而且芯片非常烫的话，建议检查硬件，芯片很有可能已经坏了，是否是软件跑飞还是外部硬件模块导致的需要你对比排查下。
设备名称：高电压电机控制和PFC开发者套件
控制卡：F28335 controlCARD RELEASE 2.2
CCS版本：4.2
问题描述：在实验过程中，由于未加看门狗程序，一次运行程序跑飞后再也无法通过CCS与F28335连接，转而提示如下信息：
Failed Software Reset:
Error 0x00000024/-1137
Error during: Register, Execution,It appears that the target is being held in reset. This may be
due to Wait-In-Reset (WIR) configuration set by the EMU 0/1 pin
settings. If this is the case, press Cancel and disconnect all
connected devices to attempt to clear the WIR configuration.
If this is a multi-core system, the master CPU or ICEPick may
not be releasing the target from reset. Please check your
configuration and/or your GEL files to ensure that nothing
is blocking the target from being released from reset.
在点击“disconnect”后，过一会又会出现如下信息提示：
The GEL callback "OnTargetConnect()" for the target "Texas Instruments XDS100v2 USB Emulator_0/C28xx" is still processing.
The function could contain an infinite loop.
Do you wish to pause the processing of this function and continue?
点击“No”则会重复出现上述提示，点击“Yes”后出现如下信息：
C28xx: The GEL callback "OnTargetConnect()" is no longer running atomically.
查看原理图后，检测RESET引脚发现其上电后一直为低电平，且上电一会MCU便会非常发烫，请问如何解决这个问题，谢谢^^。
Zhishan Yu：
回复 Martin Yu:
你好，感谢解答。
请问如何确定是否是芯片坏了呢？
