BQ25601 charging voltage setting

I set the bit7-bit3 of REG04 to be 01011, the charging voltage of 4.208 according to the specification, but actually I measured the voltage of 4.35V.Did I set something wrong

Star Xu：

please refer to datasheet 表9. REG04 Field Descriptions make sure your setting is correct.

Johnsin Tao：

回复 Star Xu:

Hi用示波器确认一下电压是否是稳定的，如果确认是4.35V, 然后在确认你的设置过程是否正确。